Device and method for producing metal diecast parts, particularly made of nonferrous metals

   
   

A device for producing nonferrous metal diecast parts is described in which a hot-duct gate system is disposed in front of mold cavities, by means of which hot-duct gate system, it is possible to guide the hot molten metal closely in front of the mold cavities and to maintain it in the liquid condition until the next shot. As a result, solidified overflows or runner ducts and pressing residues are avoided. The new device can therefore operate in a very economical and precise manner.

Un dispositivo para producir las piezas fundidas a troquel metal no ferroso se describe en las cuales un sistema de la puerta del caliente-conducto se dispone delante de las cavidades del molde, por medio de las cuales el sistema de la puerta del caliente-conducto, él es posible dirigir el metal fundido caliente de cerca delante de las cavidades del molde y mantenerlo en las condiciones líquidas hasta el tiro siguiente. Consecuentemente, se evitan los desbordamientos solidificados o los conductos del corredor y los residuos el presionar. El nuevo dispositivo puede por lo tanto funcionar de una manera muy económica y exacta.

 
Web www.patentalert.com

< Process for the preparation of lower olefins

< Programmable camera system with software interpreter

> Inks-and-printing-media-integrated pack, ink-jet printing apparatus and method

> System for repairing distressed roads that includes an asphalt interlayer

~ 00150