Shielded wire

   
   

A plurality of insulated wires having a connector for connection to a device-side terminal at a distal end thereof are collectively enclosed in a single braided conductor. An open end portion of the braided conductor is expanded and is fitted to an inner shell. An outer shell is fitted to the open end portion. A heat-shrinkable tube made of a conductive resin is fitted to each insulated wire from the connector to a position where the braided conductor has thick meshes. A metal clamp is fastened on the outer peripheral surface of the braided conductor disposed at this position. Therefore, the heat-shrinkable tube on each insulated wire is held in contact with the braided conductor. Thereby, electrical noises will not leak to exterior through the open end portion having the coarse meshes and are grounded to a shield case via the heat-shrinkable tubes, the braided conductor, and the shield shell.

Μια πολλαπλότητα των μονωμένων καλωδίων που έχουν έναν συνδετήρα για τη σύνδεση σε ένα συσκευή-δευτερεύον τερματικό σε ένα ακραίο τέλος εσωκλείεται επ' αυτού συλλογικά σε έναν ενιαίο πλεγμένο αγωγό. Μια μερίδα ανοικτών τελών του πλεγμένου αγωγού επεκτείνεται και εγκαθίσταται σε ένα εσωτερικό κοχύλι. Ένα εξωτερικό κοχύλι εγκαθίσταται στη μερίδα ανοικτών τελών. Ένας heat-shrinkable σωλήνας φιαγμένος από αγώγιμη ρητίνη εγκαθίσταται σε κάθε μονωμένο καλώδιο από το συνδετήρα σε μια θέση όπου ο πλεγμένος αγωγός έχει τα παχιά πλέγματα. Ένας σφιγκτήρας μετάλλων στερεώνεται στην εξωτερική απομακρυσμένη επιφάνεια του πλεγμένου αγωγού που διατίθεται σε αυτήν την θέση. Επομένως, ο heat-shrinkable σωλήνας σε κάθε μονωμένο καλώδιο κρατιέται σε επαφή με τον πλεγμένο αγωγό. Με αυτόν τον τρόπο, οι ηλεκτρικοί θόρυβοι δεν θα διαρρεύσουν στο εξωτερικό μέσω της μερίδας ανοικτών τελών που έχει τα χονδροειδή πλέγματα και στηρίζονται σε μια περίπτωση ασπίδων μέσω των heat-shrinkable σωλήνων, του πλεγμένου αγωγού, και του κοχυλιού ασπίδων.

 
Web www.patentalert.com

< Connected construction of a high-frequency package and a wiring board

< Flat shield cable

> Method for isomerizing halogenated aromatics

> Method for producing 4-cyano-3-oxobutanoate and 4-ctano-3-hydroxybutanoate

~ 00127