Free-cutting Ni-base heat-resistant alloy

   
   

A free-cutting Ni-base heat-resistant alloy excellent in the high-temperature strength and corrosion resistance was proposed. The alloy contains Ni as a major component, 0.01 to 0.3 wt % of C and 14 to 35 wt % of Cr, and further contains at least one element selected from Ti, Zr and Hf in a total amount of 0.1 to 6 wt %, and S in an amount of 0.015 to 0.5 wt %. The alloy has dispersed in the matrix thereof a machinability improving compound phase, where such phase contains any one of Ti, Zr and Hf as a major constituent of the metal elements, essentially contains C and either S or Se as a binding component for such metal elements. The alloy also satisfies the relations of W.sub.Ti +0.53W.sub.Zr +0.27W.sub.Hf >2W.sub.C +0.75W.sub.S and W.sub.C >0.37W.sub.S, where W.sub.Ti represents Ti content (wt %), W.sub.Zr represents Zr content (wt %), W.sub.Hf represents Hf content (wt %), W.sub.C represents C content (wt %) and W.sub.S represents S content (wt %). This successfully suppresses the amount of free S residing in the alloy, which results in an improved machinability while preventing the hot workability from being degraded.

Eine free-cutting Ni-Unterseite hitzebeständige Legierung, die in der Hochtemperaturstärke und in der Korrosionsbeständigkeit ausgezeichnet ist, wurde vorgeschlagen. Die Legierung enthält Ni als Hauptbestandteil, 0.01 bis 0.3 Gewicht % C und 14 bis 35 Gewicht % Cr und enthält weiter mindestens ein Element, das vom Ti, vom Zr und von HF in einer Gesamtmenge von 0.1 bis 6 Gewicht % vorgewählt wird, und S in einer Menge von 0.015 bis 0.5 Gewicht %., welches die Legierung in der Matrix zerstreut hat, davon eine Verarbeitungsfähigkeit, die zusammengesetzte Phase verbessert, in der solche Phase irgendein von Ti, von Zr und von HF als Hauptbestandteil der Metalelemente enthält, im Wesentlichen C und entweder S oder Se als verbindlicher Bestandteil für solche Metalelemente enthält. Die Legierung erfüllt auch die Relationen von W.sub.Ti +0.53W.sub.Zr +0.27W.sub.Hf 2W.sub.C +0.75W.sub.S und W.sub.C 0.37W.sub.S, in dem W.sub.Ti Tiinhalt (Gewicht %) darstellt, W.sub.Zr stellt Zrinhalt (Gewicht %), W.sub.Hf darstellt HF Inhalt (Gewicht %), W.sub.C darstellt C Inhalt (Gewicht %) dar und W.sub.S stellt S Inhalt dar (Gewicht %). dieses unterdrückt erfolgreich die Menge freien S liegend in der Legierung, die eine verbesserte Verarbeitungsfähigkeit beim Verhindern ergibt, daß das heiße workability vermindert.

 
Web www.patentalert.com

< Austenitic steel

< High chromium nitrogen bearing castable alloy

> Non-plated aluminum based bearing alloy with performance-enhanced interlayer

> Aluminum alloy for sliding bearing and its production method

~ 00117