A process for producing a vinyl chloride polymer, the process including the steps of charging into a polymerization vessel, vinyl chloride or a monomer mixture containing vinyl chloride, water, and other materials necessary for polymerization, and polymerizing in an aqueous medium the vinyl chloride or the monomer mixture. An antioxidant is added to a mixture of materials before polymerization, or to a polymerization reaction mixture during polymerization or after polymerization. The antioxidant is added in the state of an aqueous dispersion and by means of a uniaxial eccentric screw pump. The aqueous antioxidant dispersion can be added at a constant rate and stably, without causing any block-up of the interior of the pump even when the polymerization vessel is held at a high internal pressure. Hence, vinyl chloride polymers having less uneven plasticizer absorption and having good anti-initial discoloration properties and thermal stability can be produced stably.

Een proces om een vinylchloridepolymeer, het proces met inbegrip van de stappen van het laden in een polymerisatieschip te produceren, vinylchloride of een monomeermengsel dat vinylchloride, water, en andere noodzakelijke materialen bevat voor polymerisatie, en in een waterig milieu het vinylchloride of het monomeermengsel polymeriseert. Een middel tegen oxidatie wordt toegevoegd aan een mengsel van materialen vóór polymerisatie, of aan een mengsel van de polymerisatiereactie tijdens polymerisatie of na polymerisatie. Het middel tegen oxidatie wordt toegevoegd in de staat van een waterige verspreiding en door middel van een éénassige zonderlinge schroefpomp. De waterige anti-oxyderende verspreiding kan aan een constant tarief en stabiel worden toegevoegd, zonder enige blok-omhooggaand van het binnenland van de pomp te veroorzaken zelfs wanneer het polymerisatieschip bij een hoge interne druk wordt gehouden. Vandaar, kunnen de vinylchloridepolymeren die minder ongelijke plastificeermiddelabsorptie hebben en goede anti-aanvankelijke verkleuringseigenschappen en thermische stabiliteit hebben stabiel worden geproduceerd.

 
Web www.patentalert.com

< Process for the treatment of a cracking gas from the cracking of 1,2-dichloroethane

< Impact modifier, process for production, and resin composition containing the same

> Water-enhanced production of 1,1,1,3,3,-pentachloropropane

> Composition of epoxy polymer, thermoplastic polymer, rubber particles and curing agent

~ 00079