Simple SNP analysis using mass spectrometry
Transducing phages
Method for detecting biological agents
Methods for identifying protein-protein interactions by selective transduction
Methods, devices, and systems for monitoring time dependent reactions
Methods for isolation and activation of, and control of differentiation from, stem and progenitor ce...
Measurement and use of molecular interactions
Method and apparatus for in situ synthesis on a solid support
Color photographic element containing speed-improving benzotriazole polymer
Fluorocompound, silver halide photographic light-sensitive material, surfactant, and water-based coa...
Method for formulating a photographic developer composition and process conditions to optimize devel...
Photoresist stripper compositions
Method of making resist pattern
Photon assisted deposition of hard mask formation for use in manufacture of both devices and masks
Microoptical system and fabrication method therefor
Process for depositing and developing a plasma polymerized organosilicon photoresist film
Method for making programmable resistance memory element using silylated photoresist
Process for reducing the pitch of contact holes, vias, and trench structures in integrated circuits
Method for forming a passivation layer using polyimide layer as a mask
Dual inlaid process using a bilayer resist
Process for preventing deformation of patterned photoresist features
Image recording body and image forming device using the image recording body
Partially crosslinked polymer for bilayer photoresist
Preparation of cyanine dye for high density optical recording disk
Positive-working photoresist composition
Color electrophotographic process and apparatus
Toner compositions comprising polypyrroles
Dry toner, image forming method and process cartridge
Image carrier and apparatus and method for recording image using image carrier
Photomask blank and photomask
High discharge electrolytic manganese dioxide and an electrode and alkaline cell incorporating the s...
Structural feed through arrangement for lithium ion cells
Non-aqueous electrolyte secondary battery and method for producing the same
Battery holder with integrated switch
Cleaved type safety valve for metal vessels
Method for solid oxide fuel cell anode preparation
Apparatus and methods for sensor-less optimization of methanol concentration in a direct methanol fu...
Silicon based substrate with environmental/thermal barrier layer
Corrosion resistant magnetic thin film media
Organic electro-luminescence device
Insertion layer for thick film electroluminescent displays
Organic electroluminescent device, group of organic electroluminescent devices
Blue color filter and organic electroluminescent device using same
Composite of metal foils with a soldering material
Magnetic recording medium and manufacturing method for the same
Graded platinum diffusion aluminide coating
Spherical porous iron powder and method for producing the same
Load-bearing structure
Laminated products of olefinic thermoplastic elastomer and constructional gaskets
Aromatic polyamide film
Composite film
Weatherable building materials
Sheet coated with silicone compounds highly effective in preventing adhesion of stains and process f...
Coated article with anti-reflective layer(s) system
Anti-reflection coatings and associated methods
Epoxy resin composition, prepreg and metal-clad laminate
Veneer-based product and method of manufacture
Filament having a quadrilobate exterior cross-section and a four-sided void
Blowable insulation clusters
Microscope cover slip materials
Biaxially oriented polyester film, adhesive film and colored hard coating film
Material coil, especially strapping material coil
Thermoplastic elastomer composition
Composite layered sheet of film for refrigerators
Laminated member and method for manufacturing the same
Low dielectric constant materials and their production and use
Energy conversion fiber and sound reducing material
Thin films of crosslinked fluoropolymer on a carbon substrate
Polycrystalline diamond partially depleted of catalyzing material
Hole fill composition and method for filling holes in a substrate
Stretch-pillowed bulked laminate useful as an ideal loop fastener component
Ink-jet recording material and ink-jet recording method
Embossing and laminating irregular bonding patterns
Liquid-impervious backsheet for body fluids disposal article
Performance enhancing shoe components and methods
Process for fabricating patterned, functionalized particles and article formed from particles
Cordierite honeycomb structural body and its production process
Copy-protected optical media and method of manufacture thereof
Hermetic seal and method to create the same
Fuel permeation resistant fuel tank
Recycling method
Resin transfer molding process
Cushioning device for an athletic shoe
Insulating glass element for glazing a building
Battery and method of making the same
Deposition and chamber treatment methods
Deposition chamber and method for depositing low dielectric constant films
Crystal zone texture of glass-ceramic substrates for magnetic recording disks
Process for the vacuum coating of metal components
Method of coating a continuously moving substrate with thermoset material and corresponding apparatu...
Electrostatic coating of moldings with thermoplastic and crosslinkable copolyamide hot-melt adhesive...
Masking for engine blocks for thermally sprayed coatings and method of masking same
Process for applying multi-layer coatings comprising clear coats with anti-sag urea and dispersed si...
Process for forming multi-layer coatings on three-dimensional multi-faced substrates and product mad...
Highly adhesive surface-coated cemented carbide and method for producing the same
Application method of sealing agent
Turbine engine component having enhanced heat transfer characteristics and method for forming same
Method and an apparatus for applying a coating onto a plate
Ethylene/Tetrafluoroethylene/fluorinated vinyl monomer copolymer powder and molding method therefor
Method for coating a running web using a coating rod
Method and apparatus for preventing asphalt from sticking to paving equipment
Method for filling a wafer through-via with a conductive material
Method for metal coating of substrates
Methods of coating articles using a densified coating system
Method for treating medical devices using glycerol and an antimicrobial agent
Method of processing soy flour
Glass noodle containing genetically modified starch
Freezer to oven dough products
Method for production of baked, fried or steamed goods
Method of making a commercial packaged watermelon juice drink
Package for pulverulent egg preparations
Disposable single serve beverage filter cartridge
Pediatric formula and methods for providing nutrition and improving tolerance
Cold water soluble tea
Xanthine oxidase inhibitor and method for producing the same
Hypertension-treatment and cholesterol-depressant composition comprising extract from mixture of Pan...
Method for combating summer eczema and malanders
Pharmaceutical formulation useful for the treatment of hepatitis B, hepatitis C and other viral infe...
Method and composition for treatment of premenstrual syndrome in women
Therapeutic body lotion containing alkali metal hypohalite
Anti-cancer therapy agent of arsenic hexoxide (As4O6) of a natural chemical substance and its pharma...
Composition comprising theanine
Non-corrosive sterilant composition
Use of magnesium based products for the treatment of neoplastic diseases
Aqueous dispersion of globular silicone elastomer particles
Nasally administrable compositions
Effervescent vitaceutical compositions and related methods
Controlled release oral dosage form
Fenofibrate pharmaceutical composition having high bioavailability and method for preparing it
Controlled drug delivery system using the conjugation of drug to biodegradable polyester
Method of controlling insect infestation
Infant skin care composition
Soft gelatin capsule manufacture
Nutritional supplement based on blackcurrent seed oil
Hepatitis B virus binding proteins and uses thereof
Genetically-engineered alphaviruses, flaviviruses, and bunyaviruses with modified envelope transmemb...
Papilloma viruses, means for the detection thereof and therapy for diseases caused thereby
Recombinant yellow fever virus and method of use thereof
Hepatitis B surface antigen vaccine
Rotavirus subunit vaccine
Method for induction of differentiation of osteoclasts
Retargetting antibodies
Enrichment of dendritic cells from blood
Method and device for preparing a dental implant by immersion in a culture of mesenchymal cells
Strains of Bacillus for biological control of pathogenic fungi
Vaccines against infections caused by YF virus; YF infectious cDNA, method for producing a recombina...
Sex attractant and mating disruptant for the omniverous leafroller and orange tortrix moth
Treatment of psoriasis, allergies and auto-immune disorders of the skin with cis-6-hexadecenoic acid
Cosmetic compositions
Cosmetic intensive repair serum with morinda citrifolia
Oral hygiene formulation and method of use
Compositions comprising organosiloxane resins for delivering oral care substances
Composition for forming solid particles
Foaming antacid suspension tablets
Cells that lack p19ink4d and p27kip1 activity and methods of use thereof
Compounds and methods for diagnosing and treating amyloid-related conditions
Radioisotope dispersed in a matrix for brachytherapy
Method of preparing metal containing compounds using hydrodynamic cavitation
Method and apparatus for controlling uniformity of crystalline precipitates
Process and device for treating a gas containing hydrogen sulfide, with recycling of the reduced cat...
Process for preparing soda ash from solution mined bicarbonate brines
Process for reducing the levels of halogenated hydrocarbons
Gas purification-treating agents and gas purifying apparatuses
Process for recovering catalyst components from a mother liquor of liquid phase oxidation
Salt platform
UV water treatment apparatus
Air purifier
Molding for supporting a monolith in a catalytic converter
Scent dispensing apparatus
Air purifying apparatus and method
Solid support for mass spectrometry
One-piece pipette/dropper assembly and the method of making same
Liquid dispenser
Extracorporeal circuits for performing hemofiltration employing pressure sensing without an air inte...
Apparatus and method to pretreat and sterilize a lumen device
Method of monitoring sterilization and indicator therefor
Disinfecting flat surfaces which form rooms, using water vapor
Filtered gas plasma sterilization container with improved circulation
Reducing volatile organic compounds and common organic odors to below threshold levels in a mechanic...
Apparatus for manufacturing low-oxygen copper
Method of molding using a thermoplastic conformal mandrel
Selective inhibition of bonding of power particles for layered fabrication of 3-D objects
Process for producing molded plastic articles
Cassette half molding method therefor
Method of forming an implantable tubular prosthesis
Method of forming a saddle tree mold
Method for producing ceramic honeycomb structural body
Method for producing a ceramic preform
Method of making a treatment chemical cartridge
Adhesive composition and its use
Method of forming conductive circuits
Method of molding a cart using molding processes
Polymer-assisted aqueous deposition of metal oxide films
Method and apparatus for compensating mold thickness changes in toggle type clamping unit for inject...
Method of manufacturing a connector positioning structure
Method for making extruded test specimens usable in evaluating mechanical and other material propert...
Process for preparing a target for use in the production of a thin metal oxide film
Photochemically controlled photonic crystal diffraction
Optical shutter
Light-converting material and composition for producing the same
High-melting-point conductive oxide, method of manufacturing the same, and high-temperature electric...
Compound semiconductor single crystal and fabrication process for compound semiconductor device
Ceramic slurry composition
LIGHT-REACTION TYPE OPTICALLY ACTIVE COMPOUND, LIGHT-REACTION TYPE CHIRAL AGENT, LIQUID CRYSTAL COMP...
Process for separating water from chemical mixtures
Shaped solid comprising oxidant bleach with encapsulate source of bleach
Dust control composition
High voltage, highly conductive electrolyte for electrolytic capacitors
Waterless urinal with liquid seal, liquid seal and method of using liquid seal
Composition for selective etching of oxides over metals
Method for making microsensor arrays for detecting analytes
Active species control with time-modulated plasma
Method of adjusting the flatness of a slider using selective plasma etching
Plasma etching method
Method for manufacturing 3-D horn antenna using exposure apparatus
Accelerometer without proof mass
Method and apparatus for processing biologically hardly degradable waste water capable of reducing o...
Method for giving a fluid coolant a biocidal property
Controlling the supply of bodyfeed to a filter
Waste water treatment using activated sludge process
Process for treatment of mixture of spent wash from distillery and black liquor from pulp and paper ...
Ultrafiltration and microfiltration module and system
Method for treating process waste waters highly charged with ammonium in waste water systems
Method of making screen cylinder and screen cylinder
Filtration system with modularized energy recovery subsystem
Apparatus and method for extracting biomass
Filtering device
Fuel filter housing
Filtering means for fuel drawing assembly
Method for selective cat naphtha hydrodesulfurization
Thermal apparatus and process for removing contaminants from oil
Liquid or two-phase quenching fluid for multi-bed hydroprocessing reactor
Nitride layer forming methods
Method of making a copper on INVARŪ composite
Method for producing a sliding member having excellent seizure resistance
Electrodeposition coating process
Hydrocarbon sensor
Multilayered gas sensing element employable in an exhaust system of an internal combustion engine
Non-planar copper alloy target for plasma vapor deposition systems
Aluminum deposition shield
Electrode characterized by highly adhering superficial catalytic layer and method for its production
Multilayer oxide coated valve metal electrode for water purification
Electrolytic cell for electrochemically depositing one of the following metals, copper, zinc, lead, ...
Electrolysis gas converter and electric device using same
Part fabricating apparatus
Apparatus for electroplating copper onto semiconductor wafer
Apparatus for metal coating of bands by electroplating
Electrolysis apparatus having liquid squeezer out of contact with strip
Pasting method for eliminating flaking during nitride sputtering
Electric energy converting/storing method
Method for treating colored liquid and apparatus for treating colored liquid
Distillation plant with a column and a heat pump
Controlled-force end seal arrangement for an air press of a papermaking machine
Press arrangement and press roll for such a press arrangement
Top separator with intraseal for digester vessel in a pulp or fiber processing system
Press section and process for guiding a fiber material web through the press section
Test method for determining bleed-throughs in old corrugated container fiber pulp
Method for manufacturing coated paper and a coated paper
Process for improving the drainage of cellulosic pulps by adding carbon dioxide directly into the pu...
Device for processing wafer
Resist mask for measuring the accuracy of overlaid layers
Solventless laminating adhesive with barrier properties
Aligning mask segments to provide a stitched mask for producing OLED devices
Coatings for improved resin dust resistance
Laser welded air control valve and method
Floor coverings
Manufacture of sections of fiber-plastic compound materials
Method and composition for mounting an electronic component and device formed therewith
Low solids gas generant having a low flame temperature
Pourable, plastic-bound explosive charges and method of making the same
Selectively heat treated airbag canister and method for making same
Plain bearing producing method
Method of processing titanium metal alloys
Devices for absorbing infrared radiation comprising a quasi-crystalline element
High melting point metal based alloy material having high toughness and strength
Method of making active magnetic refrigerant, colossal magnetostriction and giant magnetoresistive m...
Method of forming an oxide film on a metallic member
Formation of doped silicon-germanium alloy utilizing laser crystallization
Method for making heat treated stainless hydraulic components
Zinc oxide semiconductor member formed on silicon substrate
Configurable single substrate wet-dry integrated cluster cleaner
Drying system for drying semiconductor wafers and method of drying wafers using the same
Cleaning method and cleaning apparatus for substrate
Method and apparatus for cleaning an article
Process and apparatus for removing impurities from surfaces contaminated with liquid
Method for cleaning a silicon-based substrate without NH4OH vapor damage
Method and apparatus for in-situ lithography mask cleaning
Treatment of air-bearing surface of a disc drive slider with light and oxidizing gas
Self aligning non contact shadow ring process kit
Electron beam physical vapor deposition apparatus and crucible therefor
Vacuum processing chamber with controlled gas supply valve
Apparatus for forming silicon oxide film and method of forming silicon oxide film
Method and apparatus for conveying electrically conductive paints between different voltage potentia...
Method of and apparatus for the application of adhesive spots to intermittently transported objects
Pipe coating apparatus and method
Powder spray-coating cabin
Glass sealer spray system for vehicle
Device for application of dope on male threads
Powder paint color changer
Powder coating device
Machine for direct or indirect application of a liquid or viscous coating medium onto a moving surfa...
Method of coating film, coating unit, aging unit, solvent replacement unit, and apparatus for coatin...
Device for processing substrate
Method of producing silicon carbide device by cleaning silicon carbide substrate with oxygen gas
Production method for silicon epitaxial wafer and silicon epitaxial wafer
Relaxed InxGa1-xAs layers integrated with Si
Photonic band gap materials based on spiral posts in a lattice
Method for the manufacture of a substrate, substrate manufactured in accordance with this method, ca...
Method and system for measuring polycrystalline chunk size and distribution in the charge of a Czoch...
Soft iron pigments
Halogen-free green pigment composition
Composition and process for production of copper circuitry in microelectronic device structures
Sponges of hydrocolloids
Organic composite material
Coating fluid for imaging element comprising solubilized collagen gelatin and hardener
Phthalocyanine compounds, water-base ink compositions and colored products
Agent for treating metallic surface, surface-treated metal material and coated metal material
System for cleaning air and method for using same
Oil seal liquid separator
Filter material useful for gas filtration and having biocidal properties
Elongated adsorbent unit with external fluid communication channels
Canister having liquefied fuel treating function
Structured surface filtration media array
Smoke evacuation system
Method for thermally regenerating the heat exchanger material of a regenerative post-combustion devi...
Method and apparatus for agglomeration
Process and apparatus for adding particulate solid material to molten metal
Sputtering target, method of making same, and high-melting metal powder material
High conductivity copper/refractory metal composites and method for making same
Cyclone dust collecting assembly for vacuum cleaner
Cabinet for housing a computer workstation
Intake screen for a vehicle
Centrifugal separator apparatus for removing particulate material from an air stream
Fused aluminum oxycarbide/nitride-Al2O3 ? rare earth oxide eutectic abrasive particles, abrasive art...
Method of bonding porous abrasive solid mass to base member with provision of sealing film on bondin...
Hydrogen production by process including membrane gas separation
Friction modifier for poor lubricity fuels
Method for preparing an emulsified fuel and implementing device
Surface treatment of metallic components of electrochemical cells for improved adhesion and corrosio...
Textile spun-dyed fiber material and use thereof for producing camouflage articles
Disperse dye mixtures
Coupler for use in oxidative hair dyeing
Carpet stain removal product which uses sonic or ultrasonic waves
Electronic publishing system
Dynamically determining the most appropriate location for style sheet application
Method and apparatus for populating a form with data
Prosthetic socket and socket component assembly
Adjustable plunger pin assembly for a prosthetic limb
Eustachian tube stent
Apparatus for, and method of, providing hip prosthesis implantation
Modular shoulder prostheses
Transosseous core approach and instrumentation for joint replacement and repair
Method for producing a multifocal corneal surface using intracorneal microscopic lenses
Efficient implantation of heart valve prostheses
Vascular prosthesis
Flanged prosthesis
Articulated stent
Stent device
Stent delivery catheter and method of making same
Apparatus and method for relining a blood vessel
Thermal pack retaining apparatus
Indwelling heat exchange catheter
Normothermic treatment apparatus with chemical, phase-change, or hot water means for heating
Patch and glue delivery system for closing tissue openings during surgery
Hazard monitor for surgical tourniquet systems
Thrombosis filter having a surface treatment
Intrasaccular embolic device
Aortic occluder with associated filter and methods of use during cardiac surgery
Locking catheter introducing system
Lancet needle anchor and method
Medical instrument, particularly a surgical instrument
Disposable surgical safety scalpel
Artificial neural tube
Vessel eversion instrument with filament elements
Ultrasonic angioplasty transmission wire
Breast surgery method and apparatus
Multi-sheath delivery catheter
Maxillary distraction device
Manual bone anchor placement devices
Patellar alignment device
Distraction instrument with fins for maintaining insertion location
Method of applying an active compressive force continuously across a fracture
Interference screw
Bone fastener and instrument for insertion thereof
Posterior backbone osteosynthesis device
Percutaneous scaphoid fixation method and device
Bone clamp
Tissue biopsy apparatus with collapsible cutter
Electrosurgical knife
Electrosurgical apparatus and methods for treating tissue
Assembly containing an electrolytically severable joint for endovascular embolic devices
Method and apparatus for cartilage reshaping by radiofrequency heating
Cryogenic medical device with high pressure resistance tip
Laser irradiation apparatus
Selective treatment of endocardial/myocardial boundary
Multi-function surgical instrument tool actuator assembly
System for detaching an occlusive device within a mammalian body using a solderless, electrolyticall...
Device for aiding urination and method of use thereof
Endovascular medical device with plurality of wires
Catheter shaft and method of making a catheter shaft
Method of introducing fluids into a patient's body
Method and compositions for use in perfusion applications
Ostomy appliance
Collecting bag for human body wastes
Disposable container for emesis
Disposable body fluid filter unit, disposable body fluid sucking device, and body fluid sucking sour...
Suction device for removing material from skin pores
Device for the treatment of macular degeneration and other eye disorders
Vaginal douches, vaginal douche applicators and methods of vaginal douching
Hydrophilic lubricity coating for medical devices comprising a hydrophobic top coat
Vascular introducer sheath with retainer
Body canal intrusion instrumentation having bi-directional coefficient of surface friction with body...
Guide for surgical device
Injection devices
Safety syringe with retraction trunk
Self-deploying catheter assembly
Rapid exchange catheter having a support mandrel
Methods and devices for occluding the ascending aorta and maintaining circulation of oxygenated bloo...
Method of operating a liquefracture handpiece
Glaucoma drainage device implant
Liquefracture handpiece tip
Articulating ultrasonic surgical shears
Implantable micro-pump assembly
Fluid passage change-over apparatus for medical treatment
Cleaning kit for old pierced holes in a person's body
Modular adjustable prophylactic hip orthosis and adduction/abduction joint
Hemorrhoid treatment and prostate massage apparatus
Deep tissue massage machine
Manually actuable ultrasonic disintegrator for breaking up or removing human or animal tissue
Quantification of muscle tone
Non-invasive method and apparatus for monitoring intracranial pressure
Method for monitoring heart failure via respiratory patterns
Prioritized dynamic memory allocation of arrhythmia episode detail collection
Blood-pressure measuring apparatus
Method and apparatus for calculating blood pressure of an artery
Implantable intravascular pressure determining device and method
Arterial-hardness evaluating apparatus
Medical diagnostic ultrasound catheter with first and second tip portions
Adaptive cancellation of ring-down artifact in imaging
Acoustical array with multilayer substrate integrated circuits
Three-dimensional doppler ultrasonic imaging system and method
Method of estimating bone mineral density and apparatus for estimating bone mineral density
Method and apparatus for obtaining B-flow and B-mode data from multiline beams in an ultrasound imag...
Ultrasonic image stabilization system and method
Real-time arbitrary mmode for ultrasonic imaging system
Technique and apparatus for ultrasound therapy
Ultrasound system for disease detection and patient treatment
Switching device for an array of multiple medical sensors
Sensor glove for physiological parameter measurement
Medical telemetry system with cellular reception of patient data
Systems, methods and computer program products for monitoring, diagnosing and treating medical condi...
Video gynecological examination apparatus
Valve and valved trocar jacket tube
Cardiac stabilizer device having multiplexed vacuum ports and method of stabilizing a beating heart
Modularly structured endoscope
Endoscope system and video camera for endoscope
Constriction device including tear resistant structures
Heart wall tension reduction apparatus
Magnetic therapy devices and methods
Radiation shield for a syringe
Non-ionic foam composition for treating asbestos-containing materials and method of using same
Decanter centrifuge with a gear box mounted on the bowl
Centrifugal separator with rotor data list indication
Centrifugal separator capable of reading a rotor identification signal under different rotor rotatio...
Apparatus and method to fold and secure sanitary napkin flaps prior to packaging
Method and apparatus for applying a curved component to a moving web
Moveable presser rail assembly
Lightweight former and former assembly
Method for making a package comprising a peelable zone
Roll and calender
Dental automatic cutting apparatus
Portable back pain relieving device
Exercise apparatus having a sliding carriage
Apparatus and method for stretching calf muscles
Pogo stick with a counting mechanism
Exercise and rehabilitation equipment
Treadmill cushion
Exerciser with an element for emitting a light beam that can be used to correct posture of the user
System and method for reducing vehicle bouncing
System with controller and method for controlling a park-interlock device in a vehicle
Range switchover apparatus for automatic transmission
Device for controlling a clutch for motor vehicles
Shift controlling method of a transmission
Driving system for industrial trucks
Powertrain having a multi-speed transmission with three planetary gear sets
On-demand two-speed transfer case for four-wheel drive hybrid vehicle
Silent chain with rocker joint pins
Continuously variable transmission
Compound material frame body without the need of drilling holes
Hollow golf ball
Golf ball retrieval apparatus
Fully adjustable torque controller, clutch and brake
Shuffle feature for a game of chance
Vent closure member with lift spacer
Duct silencer
Snow extractor for use with an air handling system
Air conditioner outlet vent device
Air outlet device for a vehicle, especially for an airplane
Tapered blade and holder for a meat skinning machine
Bath ball structure
Consumable polishing element, particularly for finishing optical glass
Pad tensioning method and system in a bi-directional linear polisher
Electric chain saw sharpening machine
Device for the finishing treatment of shaft workpieces
Surface polishing method and apparatus
Method and apparatus for mechanical and chemical-mechanical planarization of microelectronic substra...
Rare earth salt/oxidizer-based CMP method
Method for chemical mechanical polishing (CMP) with altering the concentration of oxidizing agent in...
Cleaning method and cleaning apparatus of shadow mask
Fabrication machine for fabricating spark plug with plurality of ground electrodes and fabrication m...
Method of salvaging components of a cathode ray tube when extracting failed components for testing
Self-righting flotation seat for an infant
Low profile life vest
Automatic inflator with status indicator
Outboard marine drive with an internal combustion engine
Jet-propulsion watercraft
Device for plug-connecting electric lines
Connector
Electric connector
Electrical connector
Terminal fitting and a connector
Connector having at least one contact-pin inserting port for a conduction-test tool
Waterproof connector
Electrical connector with self-retaining board locks
Computer cable connector providing quick assembly and removal
Device for rapidly assembling lamp rod and lamp seat
Two ports integral electrical connector
Power center assembly having electrical connection-protection and optional detachable surface mount
Watthour meter socket adapter with auxiliary component mounts
Circuit breaker jumper assembly with a snap-fit cover assembly
Circuit breaker jumper assembly with phase isolation
Wire reel having a universal serial bus connector capable of doing emergency charging work
Electrical connector connecting one or more flexible printed circuits
Article surveillance unit and assemblies therewith
Electrical connector having a latch mechanism
Lever actuated ZIF processor socket
Connector securing device
Electric contact device for establishing an improved contact with contactors of other device
DSX module with removable jack
Printed circuit board for straddle mount electrical connector and method for pasting the same
Electric connection box and method of producing electric connection box
Chip socket assembly and chip file assembly for semiconductor chips
Inspection of teeth using stress wave time non-destructive methods
Low profile matrix band retainers
Endodontic instruments
Mechanism with formed stop for limiting relative movement
Fragranced orthodontic appliances and method of forming same
Rotary kiln seal
Roller construction for operation at elevated temperatures
Venting plate for a containerized candle with a channeled baffle
Gas burner for outdoor cooking
Piezoelectric jet lighter for cigarette, cigar and pipe
Plastic injection mold slide retainer
Punch stripper ring knock-out for pressware die sets
Apparatus for shaping thermoplastics materials
Apparatus for shaping thermoplastic materials
Cutting device for purging an extruder
Controlled injection using manifold having multiple feed channels
Constant pressure casting head using variably displaceable cavity surface
Device for covering a core of a foothold with synthetic resin
Apparatus for and methods of damage repair
Scroll compressor having a valved back-pressure chamber and a bypass for over-compression
Backflow orifice for controlling noise generated by a rotary compressor
Fluid machinery having a helical mechanism with through holes for ventilation
Oil pump structure of an engine
Reciprocating compressor
Device and method for reducing vacuum pump energy consumption
Compressor having a seal cooling structure in which all refrigerant fluid supplied to the compressor...
Single-headed piston type swash plate compressor
Control valve for variable displacement compressor
Variable displacement compressor
Electric fan motor assembly with motor housing control switch and electrical input socket
Low speed cooling fan
Discrete passage diffuser
Fluid-driven turbine
Fluid flow controller
Method and apparatus for eliminating thermal bowing using brush seals in the diaphragm packing area ...
Device for cooling a shroud of a gas turbine blade
Method for controlling coolant flow in airfoil, flow control structure and airfoil incorporating the...
Turbo-molecular pump
Container handling device and method
Construction equipment implement
Pivoting trailer hitch
Tilt bed trailer
All terrain vehicle lift
Vehicle blocking device
Material and waste transportation
Handling arrangement for goods units and method of handling of goods units
Apparatus and method for folding and binding sheet media
Sealable fastener with sealant delivery passageway to circumferential sealant channel
Bolt fixing assembly
Precision guidance system for positioning motor vehicles
Method and apparatus for aligning keys for cutting
Drill bit tail
Cutting tool, tool holder and tool assembly
Hole saw
Method and apparatus for repairing trailer brakes
Milling cutter
Handling apparatus for elastic tubular members having a single closed end
Apparatus for conveying bulk material with vacuum-responsive controlled introduction of a conveying ...
Method of laying a cable or pipe
Pipe handling apparatus
Underwater cable deployment system and method
Flood fence
Compactor machine having vibration damping means
Molded asphalt surfacing system
Bitumen or asphalt for producing a road topping, road topping and method for the production of bitum...
Pavement method and composition with reduced asphalt roofing waste
Standoff block
Fastener clip assembly and joint structure using same
Jointing unit for bonding seams, particularly vibration welds
Adhesive strengthening embedded micromachines
Apparatus for releasably interconnecting structural components of rotational symmetry
Joint
End of train coupler mounting device
Hydraulic fastening of components
Fluid applicator
Collector type writing instrument
Gap checking device with automatic paint application
Liquid dispenser and applicator
Cartridge type stick-shaped cosmetic material feeding container
Cleaning apparatus
Anti-noise platen of the flat type for an impact printer
Ink jet printer equipped for avoiding undesired belt movement
Routing in a communication network
Ink feed arrangement for a print engine
Optical transmission system and transmitters and receivers
Method and apparatus for hermetically sealing photonic devices
Optical communication module having a constant plane of polarization of transmitted light
Optical connector
Optical coupling device
Interface between opto-electronic devices and fibers
Three color digital gobo system
Electro-optic connector module
Optical system having improved fiber-device coupling
Connecting mechanism, optical signal cable, and optical communication cable production method
Fiber optic connector system
Coupler for optical fiber cables
Optical/electrical plug connector
Optical coupling device for easing stress working on optical fiber
Temperature sensor with flexible circuit substrate
Food mixer with detachable head
Portable mixing and dispensing apparatus and method
System for mixing product streams including a combined preblender and pumping device
Purified developer producing equipment and method
Method for homogeneously mixing plural incoming product streams of different composition
Rotor-stator mixing apparatus especially for single screw extruder
Display unit with a front instrument panel and process for producing such a front instrument panel
Light-emitting structure mounted on an exhaust tailpipe of an automobile or motorcycle
Recessed lighting fixture with a columnar open mounting frame
Reflector
Pivot mechanism for a light fixture
Wave solderable pedestalled LED
Non-battery powered portable lamp
Flashlight
Paint booth lighting fixture
Hanging device
Flashing light-emitting device with a wind generator
Foldable modular light diffusion box
Three-piece interior rear view mirror assembly
Image display mechanism and image display device
Shutter for image projection system
Projector device
Single-panel color image display apparatus and method thereof
Polarizing device and projector
System for compensating for film flutter in a motion picture projector
Method and device configuration for determining the corneal thickness of an eye
Ophthalmic apparatus
Imaging and analyzing movement of individual erythrocytes in blood vessels
High resolution device for observing a body
Radically shaped lenses and goggle assembies and glasses employing same
Apparatus for displaying lens contour, apparatus for processing lens contour data, and apparatus for...
Safety eyeglasses frame
Eyeglasses having biomagnets and temple tips for eyeglasses having biomagnets
Spectacles frame
Rimless spectacles
Spectacle having no eyewire on rim lens
Recording ink onto print media
Filter for use in an inkjet printer
Continuous inkjet printer with heat actuated microvalves for controlling the direction of delivered ...
Continuous ink-jet printing apparatus with pre-conditioned air flow
Continuous ink-jet printing method and apparatus
Liquid discharge head and method for liquid discharge head
Nozzle guard for an ink jet printhead
Nozzle flood isolation for ink printhead
Tri-layer thermal actuator and method of operating
Liquid injector, method of manufacturing the injector, and ink-jet spray using the injector
Inkjet printheads
Ink printer
Replaceable ink container adapted to form reliable fluid, air and electrical connection to a printin...
Method for ink jet printing a digital image on a textile, the system and apparatus for practicing th...
Jet and method thereof for ejecting droplets of different sizes
Method and system for printing specific print zones using a bundled print head shuttle assembly
Ink jet cartridge printhead seal
Airtight elastic cap of ink-jet recording head, storage container, and ink-jet recording apparatus
Printing apparatus and method
Electronic skew adjustment in an ink jet printer
Printer cartridge kit and method
Method of managing production of printing systems and supply of expendables
Front accessible, stackable, printer/scanner/fax
Marking apparatus
Reciprocal index lookup for BTSC compatible coefficients
Slide rail attachment
Carrousel file cabinet
Temperature control for an air conditioning unit
Sneeze guards and methods for their construction and use
Rubber crawler track
Endless drive tracks and wheels therefore
Temperature compensated lift-throttle regenerative braking
System and method for vehicle stability enhancement control with surface estimate
Vehicle
Solenoid valve for brake systems
Modulator relay valve assembly and method
Electro-hydraulic braking system
Nonlot based method for assembling integrated circuit devices
Bicycle rim
Wheel spoke adjuster guard
Clamp for retaining bristle bundles of various sizes
Construction of slide rail for automobile seat
Juvenile seat assembly having crotch strap positioning apparatus
Movable baggage restraint seat
Chair
Adjusting armature for the back rests of vehicle seats, in particular, motor vehicle seats
Chair
Chair wit tiltable seat
Chair control
Gliding seating unit with locking unit
Seat cushion for stadium seats
Reinforced seat cover
Chair with pull out sleep surface
Chaise longue
Controller of sunroof for vehicle
Sliding roof device
Motor vehicle roof with integrated fan
Vehicle front body structure
Stiffeners for automotive sheet body structure
Energy absorbing frame rail tip
Method for operating a vehicle power sliding door
Vehicle aperture closure drive system
Protective cover for motor vehicles
Rigid cover assembly for a pickup truck
Rain diverting device for a tonneau cover system
Sport utility vehicle having a partial convertible top
Vehicle seat unit
Tailgate seat apparatus
Two stage body mount rebound cushion
Truck shell
Vehicle accessory-mounting assembly
Carrier for skis and ski poles
Modular stamped parts transfer gripper
Transfer press embodying a piston-cylinder assembly to effect gripping activity
Spreader for container crane
Vehicle door handle
Enhanced tamper indicator
Reversible magnetic door stop/latch
Closing device with selective locking
Push-to-release cabinet door latch
Quick connector for fluid handling
Flat-face quick coupling
Coupling adapter and assembly
Method and apparatus for monitoring pipeline expansion joint conditions
Two-part, clamp-connected chimney flue tee
Apparatus and method for sealing a vertical protrusion on a roof
Connection for a water meter
Vehicle anti-rollover device
Gas bag module
Reduced smoke gas generant with improved temperature stability
High pressure air bag inflation system
Air bag module with vent
Method for manufacturing a cover cap for a gas bag restraint module and cover cap
Thin airbag module design for overhead applications
Method of programming and operating tilt and recline functions in a wheelchair
Safety binding for ski boot
Trailer coupler
Adjustable support for sports motorcycle
Noise feedback for training wheels
Foldable electric vehicle for recreation and traveling
Chain driven front wheel drive and rear wheel steering bicycle
Pedal powered vehicle
Vertical pedal-operated vehicle
Apparatus for assisting entry into high road clearance vehicles
Running boards and methods of constructing a running board
Vehicle side step assembly
Upper support in vehicle suspension systems
Vehicle wheel suspension arrangement
One piece trailing arm for torsional springs
Axle assembly
Caster adjuster for a wheel assembly
Convertible hand cart with improved locking means
Ski patrol toboggan
Binding for a snowboard or the like
Sintered sheet plastic material and gliding board base material
Adjustable fit in-line skate
Automotive minimal-turning radius control system
Vehicle roll control
Device for sealing
Mat gasket for fluid conduits
Gasket with integral channel and port seal
Monolayer metal gaskets
Segmented labyrinth seal assembly and method
Seal arrangement providing a seal between a bore and a rod moveable in the bore
Multiple-ply resilient seal
Cylindrical crane game
Target baffle bracket
Table and method of playing a combination poker and baccarat-type card game
Card game
Method for playing casino board game
Method of playing a variation of checkers board game
Multilevel checkers game
Device and method for continuously shuffling and monitoring cards
Device and method for forming hands of randomly arranged decks of cards
Apparatus and method for adapting a gaming machine for use with a coin hopper or printer
Lighted dice
Device for generating an offset of transported flexible sheet material
Method and device for changing the hold of flat articles being conveyed held by grippers
Adjustable urging force system for stacker paddle
Sheet feeder and sheet tray
Stacking device of a printing press
Intelligent feeder
Laser cutting system
Fluid-filled active vibration damping device and method of producing the same
Gas/liquid contacting, perforated tray assembly
Gas-liquid tray
Humidifier with swingable cover
