Disclosed is a successively biaxially stretched film obtained by successive biaxial stretching method comprising extruding a melt of a .beta.-crystal nucleating agent-containing polypropylene-based resin composition from a T-die, cooling the extruded resin on a chill roll, and stretching the resulting web sheet longitudinally and then transversely, wherein the longitudinally stretched sheet is made to have a degree of .beta.-crystal orientation of less than 0.3 by the following method (I) and/or (II), optionally subjected to annealing treatment, and transversely stretched: method (I): melting the polypropylene-based resin composition containing needle crystals of a specific .beta.-crystal nucleating agent at a temperature not lower than m.p. of the polypropylene-based resin and lower than dissolution temperature of the .beta.-crystal nucleating agent in the polypropylene-based resin melt, and extruding the melt from the T-die at the same temperature, method (II): adjusting neck-in ratio during longitudinal stretching to 25 to 55%. The porous polypropylene film has good breakage resistance during manufacture, excellent thickness uniformity, high porosity and air-permeability, and is useful for battery separators.

 
Web www.patentalert.com

< Method for manufacturing an electric conductor for electrodes

> Membrane-electrode assembly, polymer membranes for a membrane-electrode assembly, polymer electrolyte fuel cells, and methods for the production thereof

> Membranes for fuel cells, method for producing said membranes and production of fuel cells using membranes of this type

~ 00591