A bandpass filter having a bandpass width appropriate for UWB, a high frequency module including the bandpass filter, and radio communication device including both is provided. The bandpass filter including a laminate composed of a plurality of dielectric layers 11; first and second ground electrodes arranged on the bottom and top surfaces, respectively, of the laminate; resonance electrodes 30a, 30b, and 30c arranged in an inter-digital structure on a first inter-layer surface of the laminate, one end of each of the resonance electrodes being grounded; an input coupling electrode 40a arranged on an inter-layer surface different from the first inter-layer surface of the laminate facing the resonance electrode 30a of the input stage in the inter-digital type; and an output coupling electrode 40b arranged on an inter-layer surface different from the first inter-layer surface of the laminate to face the resonance electrode 30b of the output stage. Accordingly, it can be possible to achieve a bandpass filter that has a flat and low-loss pass characteristic over the entire region of the broad passband that could not be achieved by a band pass filter using the conventional 1/4 wavelength resonator.

 
Web www.patentalert.com

< Frequency mixer using current feedback amplifiers

> Treatment of a location request by a first location request treatment device (a gateway mobile location centre) in a home register (HLR) for retransmission to a second location request treatment device

> System for harmonizing a motor vehicle's status information between at least two ID transmitters

~ 00589