A metallic-composite joint is formed by inserting a metallic member into a slot of a pi-shaped composite preform. The preform is formed from woven carbon fiber in a binder of resin and may or may not be cured prior to assembly. An inert compliant layer is located between the legs of the preform and the metallic member. The resin binder or an adhesive is used to bond the compliant layer to the preform. The compliant layer has a coefficient of thermal expansion that more closely matches that of the preform. The properties of the compliant layer also avoid galvanic corrosion between the carbon in the preform and the metallic member.

 
Web www.patentalert.com

< Roadway for decelerating a vehicle including an aircraft

> Side thruster module

> Flight control surface actuator assembly including a free trial mechanism

~ 00555