A closing phase that produces the smallest energization flux error at a connection input point is calculated based upon a residual flux of the first closing phase and the preliminarily given pre-arc characteristic and closing time deviation characteristic of a three-phase circuit breaker, so that the calculated phase value is set as a target closing phase of the first closing phase. A closing phase that produces the smallest energization flux error when a residual flux of zero is calculated, so that the calculated phase value is set as a target closing phase of the remaining two phases. The total time required from the reference point to the target closing phases of the remaining two phases and a delay time corresponding to an integer multiple of a given cycle of the three-phase power supply is set as a target closing time of the remaining two phases.

 
Web www.patentalert.com

< Over-current protection circuit

< Electrical rotating machine control unit and power generation system

> Rotating electric machine for automotive application

> Defibrillator power source with replaceable and rechargeable power packs

~ 00284