A power control unit activates a control signal ST for a circuit block to be set to a standby state before turning off power of the circuit block or a whole chip, and saves an operation result of data processing of the circuit block into a memory unit. When the power is again supplied to the circuit block in the standby state, the power control unit activates a control signal RES after the power supply is started and restores the data saved in the memory unit to the circuit block. Flip-flops in the circuit block are connected in series when the saving or restoring of data is performed, and perform a data transfer operation with a path different from that in a normal operation. Therefore, a semiconductor device can be provided which can rapidly transit to a standby mode having reduced current consumption while holding internal information.

 
Web www.patentalert.com

< Semiconductor device

< Apparatus, method and system for message-based intelligent tandeming of incoming calls to application nodes in telecommunication systems

> Hybrid semiconductor—magnetic spin based memory with low transmission barrier

> Method for removing conductive residue

~ 00239