A method of manufacturing a compressor valve plate (36) comprises at least the following steps in succession: blanking of a blank of the plate (36) from a steel sheet of suitable thickness, punching holes corresponding to the output and intake openings, the hole corresponding to the output opening being a preliminary hole (48a) having a diameter larger than the final diameter of this opening (48), forming, by coining, a depression (42) for housing an output valve-closure blade (54), with the depth of the depression increasing towards the end of the depression which corresponds to the preliminary hole (48a), in a manner such that, during the coining, at least some of the material of the blank creeps towards the preliminary hole, partially filling it, calibrating the output opening (48) to the final diameter by punching, and coining an annular projection (50) around the calibrated output opening (48) to define a valve seat for the output closure blade.

 
Web www.patentalert.com

< Apparatus and method for controlling operation of compressor

< Bridges, elements and junctions for electroosmotic flow systems

> Plunger for well casings and other tubulars

> Fuel injection pump

~ 00225