Method for manufacturing yoke of electric rotating machine

   
   

A yoke in a motor includes a cylindrical yoke housing having a closed end and two magnets that is located in the yoke housing. The magnets are fixed to the yoke housing with adhesive. The adhesive is applied a at least to each adhering area of the yoke housing that is to be adhered to the corresponding magnet or to an adhering area of the each magnet that is to be adhered to the yoke housing. The adhesive is spread to the adhering areas of the yoke housing and each magnet by sliding the adhering areas on each other. Therefore, the magnets are firmly fixed to the yoke housing with a small amount of adhesive.

Um garfo em um motor inclui uma carcaça cilíndrica do garfo que tem uma extremidade closed e dois ímãs que seja ficada situada na carcaça do garfo. Os ímãs são reparados à carcaça do garfo com adesivo. O adesivo é a aplicado ao menos a cada área aderindo da carcaça do garfo que deve ser aderida ao ímã correspondente ou a uma área aderindo de cada ímã que deve ser aderido à carcaça do garfo. O adesivo é espalhado às áreas aderindo da carcaça do garfo e de cada ímã deslizando as áreas aderindo em se. Conseqüentemente, os ímãs são reparados firmemente à carcaça do garfo com um pouco de adesivo.

 
Web www.patentalert.com

< Unit consisting of a bearing with instrument and housing joined by a coupling piece

< Tire wheel bearing apparatus

> Method for forming a bearing apparatus

> Parking brake for a motor vehicle

~ 00175