Disclosed is a rubber process oil in which the content of polycyclic
aromatics (PCAs) as determined by the IP 346 method is less than 3% by
mass and which is rich in aromatic hydrocarbons, and a method for
producing the same. The aniline point of the rubber process oil is
80.degree. C. or less, and the % C.sub.A value as determined by ring
analysis according to the Kurtz method is from 20 to 50%. The rubber
process oil is produced by using extraction of lube oil fraction with a
solvent having a selective affinity for aromatics. The extraction
conditions are determined so that the extraction yield is regulated to a
predetermined requirement defined by the PCAs content of the lube oil
fraction. Alternatively, the extract is cooled to further separate into
the extract and the raffinate, and the second raffinate is used for the
rubber process oil.
Показано rubber отростчатое масло в содержание полициклических aromatics (PCAs) как обусловлено методом ip 346 чем 3% массой и богато в ароматических углеводородах, и метод для производить эти же. Пунктом анилина rubber отростчатого масла будет 80.degree. C или, и % значения C.sub.A как обусловлено анализом кольца согласно методу Kurtz от от 20 до 50%. Rubber отростчатое масло произведено путем использование извлечения части масла lube при растворитель имея селективное сродство для aromatics. Условия извлечения обусловлены так, что выход извлечения будет отрегулирован к предопределенному требованию определенному содержанием PCAs части масла lube. Друг, выдержка охлажена более далее для того чтобы отделить в выдержку и raffinate, и второе raffinate использовано для rubber отростчатого масла.