Composition for molding thin-walled parts, and injection-molded squeeze tube made thereof

   
   

Compositions for injection-molding of long, thin-walled, one-piece squeeze tubes include low-density polyethylene having a density less than about 0.925 g/cc and a melt index of at least about 50 g/10 minutes, and polypropylene having a high melt index greater than about 800 g/10 minutes, wherein the high melt index is attained by peroxide degradation of the polypropylene during melt processing. The compositions can also include a polymer that is miscible and compatible with low-density polyethylene and polypropylene for enhancing flow of the molding composition in the mold, the polymer having a glass transition temperature T.sub.g of about -20 to -40.degree. C., and/or metallocene resin having a density less than about 0.915 g/cc.

Aufbau für Einspritzung-Formteil der langen, dünnwandigen, einteiligen Pressungschläuche schließt das von geringer Dichte Polyäthylen mit ein, das eine Dichte weniger als ungefähr 0.925 g/cc und ein Schmelzindex von mindestens ungefähr 50 Minuten g/10 haben, und das Polypropylen, das einen hohen Schmelzindex grösser als ungefähr 800 Minuten g/10 hat, worin der hohe Schmelzindex durch Hyperoxydverminderung des Polypropylens während der Schmelzverarbeitung erreicht wird. Der Aufbau kann ein Polymer-Plastik, das mischbar und mit von geringer Dichte Polyäthylen und Polypropylen für das Erhöhen des Flusses der Preßmischung in der Form, das kompatibel ist Polymer-Plastik auch mit einschließen, das eine Glasübergangstemperatur T.sub.g von ungefähr -20 zu -40.degree hat. C. und/oder metallocene Harz, das eine Dichte weniger als ungefähr 0.915 g/cc hat.

 
Web www.patentalert.com

< Decorative window system

< Compression mounting system for shower doors

> Lenses capable of post-fabrication modulus change

> Method and apparatus for direct connection between two integrated circuits via a connector

~ 00153