High absorption erbium doped amplifying optical fiber

   
   

An optical waveguide fiber amplifier comprising a core region comprises at least in part between 1300 wt.ppm and 3600 wt.ppm Er.sub.2 O.sub.3, between 6.0 wt. % to 10.0 wt. % Al.sub.2 O.sub.3 and between 9.0 wt. % and 20.0 wt. % GeO.sub.2. The amplifier also comprising an inner clad surrounding the core region and an outer clad surrounding the inner clad. The relative refractive index percentages and radii of the core region, inner clad and outer clad are chosen from the following ranges: the relative refractive index percent of the core segment within the range of from about 0.5% to about 2.0%; the relative refractive index percent of the inner clad within the range of from about 0.0% to about 0.4%; the outer radius of the core region within the range of from about 0.7 .mu.m to about 1.5 .mu.m; and, the outer radius of the inner clad within the range of from about 4.3 .mu.m to about 18.8 .mu.m.

Оптически усилитель волокна волновода состоя из зоны сердечника состоит из по крайней мере в части между 1300 wt.ppm и 3600 wt.ppm Er.sub.2 O.sub.3, между 6.0 wt % до 10.0 % wt Al.sub.2 O.sub.3 и между 9.0 wt % и 20.0 % wt GeO.sub.2. Усилитель также состоя из внутреннее clad окружающ зону сердечника и наружного clad окружающ внутреннее clad. Относительные проценты рефрактивного индекса и радиусы зоны, внутреннего clad и наружного clad сердечника выбраны от following рядов: относительные проценты рефрактивного индекса этапа сердечника внутри ряд от около 0.5% до около 2.0%; относительные проценты рефрактивного индекса внутреннее clad внутри ряд от около 0.0% до около 0.4%; наружный радиус зоны сердечника внутри ряд от около 0.7 mu.m к mu.m около 1.5; и, наружный радиус внутреннее clad внутри ряд от mu.m около 4.3 к mu.m около 18.8.

 
Web www.patentalert.com

< Spectral drift and correction technique for hyperspectral imaging systems

< Optical filter employing holographic optical elements and image generating system incorporating the optical filter

> METHODS OF OPERATING MEMORY SYSTEMS IN WHICH AN ACTIVE TERMINATION VALUE FOR A MEMORY DEVICE IS DETERMINED AT A LOW CLOCK FREQUENCY AND COMMANDS ARE APPLIED TO THE MEMORY DEVICE AT A HIGHER CLOCK FREQUENCY

> Accelerated signal encoding and reconstruction using pixon method

~ 00144