Physical layer and data link interface with reset/sync sharing

   
   

A word-based interface between a MAC and a PHY, allowing for variable pin counts, variable PHY and MAC data speeds, and variable numbers of connected PHYs. The word-based interface allows for the PHY to provide PHY-to-MAC words to the MAC, and for the MAC to provided MAC-to-PHY words to the PHY, where the PHY-to-MAC words are synchronized with the MAC-to-PHY words. Data and commands are provided in fields of the words, and may be time multiplexed over the interface. Circuits within the MAC and PHY allow for the MAC to detect if a PHY is present, the number of active pins, and the number of PHYs connected. The reset and synchronization signals are integrated into a single reset/sync signal. Identification data is exchanged between the MAC and PHY so that the proper device driver for the PHY may be loaded independently of the BIOS.

Eine Wort-gegründete Schnittstelle zwischen einem MAC und einem PHY, lassend variablen Stift Zählimpulse, Geschwindigkeiten der variablen PHY und MAC-Daten und variable Zahlen von verbundenem PHYs zu. Die Wort-gegründete Schnittstelle darf, damit das PHY PHY-zu-PHY-to-MACwörter zum MAC zur Verfügung stellt, und den MAC zu zur Verfügung gestellt MAC--PHY zu den Wörtern zum PHY, in dem die PHY-zu-PHY-to-MACwörter mit MAC--PHY zu den Wörtern synchronisiert werden. Daten und Befehle werden innen auffängt von den Wörtern und kann Zeit sein zur Verfügung gestellt, die über der Schnittstelle geschaltet wird. Stromkreise innerhalb des MAC und des PHY dürfen den MAC ermitteln, wenn ein PHY anwesend ist, die Zahl aktiven Stiften, und die Zahl von PHYs angeschlossen. Das Zurückstellen und die Synchronisiermeldungen werden in ein einzelnes reset/sync Signal integriert. Kennzeichnung Daten werden zwischen dem MAC und dem PHY ausgetauscht, damit die korrekte Gerätebetreibung für das PHY vom BIOS unabhängig geladen werden kann.

 
Web www.patentalert.com

< Silicone rubber adhesive composition and integrally molded article of silicone rubber and thermoplastic resin

< Method for producing a porous silicon film

> Method and apparatus for reduction of energy loss due to body diode conduction in synchronous rectifiers

> Process and catalyst for production of formaldehyde from dimethyl ether

~ 00127