Reciprocating piston compressor having improved noise attenuation

   
   

A reciprocating piston compressor having a suction muffler and a pair of discharge mufflers to attenuate noise created by the primary pumping frequency in the primary pumping pulse. The suction muffler is disposed along a suction tube extending between the motor cap and the cylinder head of the compressor. The discharge mufflers are positioned in series within the compressor to receive discharge gases from the compression mechanism and are spaced one quarter of a wavelength from each other so as to sequentially diminish the problematic or noisy frequencies created during compressor operation. The motor/compressor assembly including the motor and compression mechanism is mounted to the interior surface of the compressor housing by spring mounts. These mounted are secured to the housing to define the position of the nodes and anti-nodes of the frequency created in the housing to reduce noise produced by natural frequencies during compressor operation.

Ein austauschender Kolbenkompressor, der einen Saugabblasdämpfer und ein Paar Entladung Abblasdämpfer, zum der Geräusche zu vermindern verursacht durch die pumpende Primärfrequenz im pumpenden Primärimpuls hat. Der Saugabblasdämpfer wird entlang einem Saugschlauch abgeschaffen, der zwischen der Bewegungskappe und dem Zylinderkopf des Kompressors verlängert. Die Entladung Abblasdämpfer werden in Reihe innerhalb des Kompressors in Position gebracht, um Entladung Gase von der Kompression Einheit zu empfangen und werden ein Viertel einer Wellenlänge von einander, damit die problematischen oder lauten Frequenzen der Reihe nach zu vermindern gesperrt, die während des Kompressorbetriebes verursacht werden. Das motor/compressor einschließlich den Motor und die Kompression Einheit wird zur Innenoberfläche des Kompressorgehäuses durch Frühling Einfassungen angebracht. Diese, die angebracht werden, werden an das Gehäuse befestigt, um die Position der Nullpunkte und der Anti-nodes der Frequenz zu definieren, die im Gehäuse verursacht wird, um die Geräusche zu verringern, die durch natürliche Frequenzen während des Kompressorbetriebes produziert werden.

 
Web www.patentalert.com

< Dual-stage, plunger-type piston compressor with minimal vibration

< Dry compressing vacuum pump having a gas ballast device

> Dynamo electric machines and stators for use in same

> Membrane pump comprising an inlet opening that is controlled by the membrane

~ 00126