Fiber array, and waveguide device

   
   

Two ribbon-shaped optical fibers are bare at their leading ends, and bare fibers are adhered and fixed by a V-shaped substrate and a holding plate. The jackets of the ribbon shaped optical fibers are adhered and fixed in the V-shaped substrate by a jacket housing plate. Moreover, dummy fibers on the outermost sides of the bare fibers contact at their portions with the end edges of the V-grooves, and thus they are subject to the displacements of the pitches of the jacket portions as a stress from the outer side. Therefore, no stress is applied to the bare fibers on the inner side for transmitting optical signals.

2 тесемк-sformirovali оптически волокна чуть-чуть на их leading концах, и чуть-чуть волокна придержаны и зафиксированы v-shaped субстратом и держа плитой. Куртки волокон сформированных тесемкой оптически придержаны и зафиксированы в v-shaped субстрате плитой снабжения жилищем куртки. Сверх того, думмичные волокна на outermost сторонах чуть-чуть волокон контактируют на их частях с краями конца В-pazov, и таким образом они subject to смещения тангажей частей куртки как усилие от наружной стороны. Поэтому, никакое усилие не приложено к чуть-чуть волокнам на внутренней стороне для передавать оптически сигналы.

 
Web www.patentalert.com

< Equipment box, in particular a splice box

< High density fiber optic module

> Optical systems comprising curved MEMs mirrors and methods for making same

> Attenuation devices

~ 00121