A first intermediate plate 5C adjacent to a heat receiving plate 5A and a
second intermediate plate 5D adjacent to the first intermediate plate 5C
are provided so that the slit width of the openings (first opening 5a) in
the first intermediate plate 5C is wider than that (second opening 5b) in
the second intermediate plate 5D. In this way, when the first intermediate
plate 5C and the second intermediate 5D are stacked, a tunnel structure is
formed in which the opening dimension L3 (the opening dimension of the
second openings 5b) of the communicating sections through which the first
openings 5a and the second openings 5b communicate with each other is
smaller than the length L2 (the opening dimension of the first openings
5a) of the tunnel portions (L2>L3). Therefore, a heat-generating member
with large density of heat generation can be effectively cooled.
Ένα πρώτο ενδιάμεσο πιάτο 5C δίπλα σε μια θερμότητα που λαμβάνει το πιάτο 5A και ένα δεύτερο ενδιάμεσο πιάτο 5D δίπλα στο πρώτο ενδιάμεσο πιάτο 5C παρέχεται έτσι ώστε το πλάτος σχισμών των ενάρξεων (πρώτο άνοιγμα 5a) στο πρώτο ενδιάμεσο πιάτο 5C είναι ευρύτερο από αυτό (δεύτερο ανοίγοντας 5B) στο δεύτερο ενδιάμεσο πιάτο 5D. Κατ' αυτό τον τρόπο, όταν συσσωρεύονται το πρώτο ενδιάμεσο πιάτο 5C και δεύτερο ενδιάμεσο 5D, μια δομή σηράγγων διαμορφώνεται στην οποία η ανοίγοντας διάσταση L3 (η ανοίγοντας διάσταση των δεύτερων ενάρξεων 5B) των τμημάτων επικοινωνίας μέσω των οποίων οι πρώτες ενάρξεις 5a και οι δεύτερες ενάρξεις 5B επικοινωνούν η μια με την άλλη είναι μικρότερη από το μήκος L2 (η ανοίγοντας διάσταση των πρώτων ενάρξεων 5a) των μερίδων σηράγγων (L2 L3). Επομένως, ένα heat-generating μέλος με τη μεγάλη πυκνότητα της παραγωγής θερμότητας μπορεί να δροσιστεί αποτελεσματικά.