A plug is formed by depositing a first material to partially fill an opening, leaving an unfilled portion with a lower aspect ratio than the original opening. A second material is then deposited to fill the remaining portion of the opening. The first material has good filling characteristics but has higher resistivity than the second material. The second material has low resistivity to give the plug low resistance.

 
Web www.patentalert.com

< Method and system for providing optical proximity correction for structures such as a PMR nose

< Non-volatile memory arrays having dual control gate cell structures and a thick control gate dielectric and methods of forming

> System for managing appliances

> System using a direct data file system with a continuous logical address space interface
~ 00617