A spindle and hub assembly for a vehicle wheel is constructed so that, in the event of a failure of the bearing arrangement rotatably supporting the hub on the spindle, separation of the hub from the spindle will not immediately occur but will be prevented for a period of time sufficient for the operator of the vehicle to safely continue to advance the vehicle to a location where corrective action may be taken. An annulus supported on the spindle is secured to the spindle by a nut separate from the annulus, and the annulus has an outside diameter large enough such that a shoulder located within the opening in the hub through which the spindle extends is capable of engaging the annulus in the absence of the bearing arrangement, thereby preventing the hub from separating from the spindle.

 
Web www.patentalert.com

< Method for manufacturing a bearing ring

< Tilt steering mechanism

> Linear motion guide system with highly-tight sealing units

> Roller bearing for linear movements

~ 00609