A duct was configured such that an incident side and an outgoing side of each of liquid crystal panels 34r, 34g, and 34b are formed with discharge ports r1 and r2, g1 and g2, and b1 and b2 to discharge the air from fans 41 to 43 through ducts 411 to 431, and at the same time, a PBS 28 for aligning the polarizing direction of the light from a light source lamp is formed with a discharge port p1 to discharge the air from the fan 43 through the duct 432, and an incident side discharge port b1 and an outgoing side discharge port b2 of the liquid crystal panel 34b corresponding to the blue light are formed with the ducts so as to discharge the air from the fans 43 and 41 which are different from each other. As a result, even when an amount of light per unit area of high luminance is increased, the liquid crystal panels and the polarizing plates and the PBS can be effectively cooled by three sets of the fans.

 
Web www.patentalert.com

< Light source

< Lamp current balancing topologies

> Circuit and method for improving image quality of a liquid crystal display

> Method for illuminating liquid crystal display device, a back-light assembly for performing the same, and a liquid crystal display device using the same

~ 00601