A suspension assembly of an actuator of a hard disk drive prevents collisions with a data storage disk of the drive. The suspension assembly includes a load beam, a bracket having a rear end at which the bracket is coupled to the load beam and a flexure, a slider that is attached to the bracket and carries the read/write head of the hard disk drive, and a limiting mechanism capable of selectively attaching and detaching a respective portion of the bracket to and from the load beam during operation. The load beam has a dimple projecting toward the bracket and which normally contacts a first surface of the bracket. The slider is attached to a second surface of the bracket opposite the first surface. The limiting mechanism attaches a portion of the bracket bearing the slider to the load beam when the read/write head is unloaded from the disk. Therefore, the wobbling of the slider is suppressed during the unloading operation. On the other hand, the portion of the bracket bearing the slider is detached from the load beam during a read/write operation to allow the slider to pitch and roll more freely about the dimple.

 
Web www.patentalert.com

< Rotating disk storage device having a carriage formed with non-binding pads

< Preheating control system of information processing device and control method thereof

> Automatic collection and dissemination of product usage information

> Correcting errors in disk drive read back signals by iterating with the Reed-Solomon decoder

~ 00601