An electromagnetic shielding gasket is provided, which is capable of reducing the amount of projection from the inner surface of a first opposing wall having gasket holding holes and is less likely to come off through the gasket holding holes in the direction from the inner surface side toward the outer surface side of the first opposing wall. A communication device as an electronic device has a device body having a plural number of sub-casings and electromagnetic shielding gaskets 1. A first opposing wall 102a disposed on the sub-casing of the device body includes a plural number of gasket holding holes 104 and gasket guiding holes. The electromagnetic shielding gasket 1 has a gasket body 2 and a plural number of fitting parts 4 and come-off stopping parts 3. The fitting parts 4 are guided in the gasket guiding holes and then fitted in the gasket holding holes. The come-off stopping parts 3 are formed not to come off through the gasket holding holes 104 in the direction from the inner surface side to the outer surface side of the front wall 102a even if they deform under external forces.

 
Web www.patentalert.com

< Image forming device and image forming method

> Two component photodiode detector

> Voltage level shifting device

~ 00507