A system and method for detecting and correcting excess current in a power amplifier in a transmit chain of a mobile terminal are provided. Over current detection and correction circuitry compares a current detection signal indicative of an output current of the power amplifier to a maximum current ramp during ramp-up for a transmit burst. If the current detection signal exceeds the maximum current ramp, then a power control signal controlling a supply voltage provided to the power amplifier circuitry is reduced, thereby reducing the output power and output current. Over voltage detection and correction circuitry compares a voltage detection signal indicative of an output voltage of the power amplifier to a maximum voltage ramp during ramp-up for the transmit burst. If the voltage detection signal exceeds the maximum voltage ramp, then the power control signal is reduced.

 
Web www.patentalert.com

< IR control signal distribution via a communications network

> I/Q mismatch correction using transmitter leakage and gain modulation

~ 00475