A data recording disk drive has one or more capacitive sensors for sensing out-of-plane vibration of the disk or disks. The sensors are attached to a support structure that is attached to the disk drive housing. Each sensor is associated with a disk and faces a surface of the disk near the outer perimeter of the disk and close to the recording head. The support structure can be made of a metal or a high-strength plastic and can be a separate structure mounted to the housing, or integrated as part of the single-piece housing casting. If it is metallic, as would be the case if it were integrated with the housing, then layers of insulating material separate the sensors from the support structure. A support structure that serves other functions in the disk drive, such as support for disk damping plates, can also function as the support structure for the capacitive sensors.

 
Web www.patentalert.com

< Hard disk drive cover with protruding blades for reducing disk and HGA vibration

> Head design with overlapping coil for narrow pitch tape head

~ 00474