There is provided a rotary compressor capable of preventing deterioration of performance following plug fixing carried out to prevent falling-off of a spring member. The rotary compressor comprises a cylinder constituting a rotary compression element, a roller engaged with an eccentric portion formed in a rotary shaft of an electric element, and eccentrically rotated in the cylinder, a vane abutted on the roller to divide an inside of the cylinder into a low pressure chamber side and a high pressure chamber side, a spring member for always pressing the vane to the roller side, a housing portion of the spring member, formed in the cylinder, and opened to the vane side and a hermetically sealed container side, a plug positioned in the hermetically sealed container side of the spring member, and inserted into the housing portion to fit into a gap, and an O ring attached around the plug to seal a part between the plug and the housing portion. In this case, a space between the cylinder and the hermetically sealed container is set smaller than a distance from the O ring to an end of the plug on the hermetically sealed container side.

 
Web www.patentalert.com

< Flow controlled blood pump system

> Compressor, method for manufacturing the compressor, defroster of refrigerant circuit, and refrigeration unit

~ 00469