A permanent magnet type rotating electrical machine that is capable of producing a higher output and is suitable for high-speed rotation. A pair of nonmagnetic portions are formed in a rotor core at opposite ends of each pole. The waveform of induced voltage and a motor voltage are adjusted based on two parameters, i.e., an angle covering minimum magnetic path portions formed by the nonmagnetic portions and a magnet width. Assuming that a circumferential pitch of teeth cores with respect to a rotor axis is .tau.s (degree) and an opening angle contained by a circumferential width between radial width minimum points of the pair of magnetic path portions with respect to the rotor axis is .theta. (degree), .theta..apprxeq.(n+Y).times..tau.s (n: integer larger than 0) is met. Y=0.5 is set when the stator windings are wound in a distributed winding way, and Y=0.9-1.2 is set when they are wound in a concentrated winding way. The magnet forming one pole is divided into two parts, and a bridge portion is formed between the two divided magnet parts.