In a case where reception power in a radio access point is high by external noise, the normalcy of the radio access point is tested. In order to judge the normalcy of the radio characteristic of the radio access point, a test is performed through the calling connection between a testing access terminal in the radio access point and a predetermined device. An RSSI is measured before and after the transmission of a test signal. When the RSSI exceeds a threshold value, the path loss of a reverse link connected from the radio access point to the testing access terminal is increased by an attenuator. Then, reception power in the testing access terminal decreases. Thus, initial transmission power in accordance with the reception power from the testing access terminal is raised and the calling connection of the testing access terminal can be performed even under the external noise.

 
Web www.patentalert.com

< RADIO MEASUREMENT PROCEDURE IN WIRELESS COMMUNICATION SYSTEM

> Transmitting Information in Mobile Communications System

~ 00409