A method and apparatus to automatically reverse the motor of a power tool, such as a dispensing gun or similar tool. In some constructions, a controller automatically reverses the direction of plunger movement and removes the plunger from contact with the back wall of a cartridge. The controller has a trigger switch that is coupled to a power source, such as a battery, and includes a main power on/off switch and a potentiometer. A protection or secondary switch is coupled in parallel to the main power on/off switch. A power supply circuit and a commutator are each coupled to the main and secondary switches. An overload sensor is coupled to the commutator. The controller includes a programmable device that is coupled to the power supply circuit, the potentiometer, the commutator, and the overload sensor. The programmable device is operable to sense actuation and deactuation of the main power on/off switch, read an electromotive force from the potentiometer, and, upon sensing deactuation of the main switch, send a control signal to the commutator to reverse current flow therethrough for a predetermined amount of time, and deactuate the secondary switch when the predetermined time has lapsed.

 
Web www.patentalert.com

> EL lighted articles

~ 00384