A module has an IC for communication control (a PHY unit) and an EEPROM (or MCU) connected to the PHY unit via an I2C bus. When a software reset is triggered while the PHY unit reads non-volatile register (NVR) data from the EEPROM (or MCU) via the I2C bus, the module causes an I2C interface circuit of the PHY unit to forcedly toggle and send a clock signal to the EEPROM (or MCU) via the I2C bus to make the EEPROM (or MCU) recognize that interrupted communications via the I2C bus are pseudo completed.

 
Web www.patentalert.com

> Three part architecture for digital television data broadcasting

~ 00371