Off-axis levelling in lithographic projection apparatus

   
   

In an off-axis levelling procedure a height map of the substrate is generated at a measurement station. The height map is referenced to a physical reference surface of the substrate table. The physical reference surface may be a surface in which is inset a transmission image sensor. At the exposure station the height of the physical reference surface is measured and related to the focal plane of the projection lens. The height map can then be used to determine the optimum height and/or tilt of substrate table to position the exposure area on the substrate in best focus during exposure. The same principles can be applied to (reflective) masks.

 
Web www.patentalert.com

< Substrate bias generator in semiconductor memory device

< Transaction dispatcher for a passenger entertainment system, method and article of manufacture

> Methods for continuous embedded process monitoring and optical inspection of substrates using specular signature analysis

> Dynamically configured processing of composite stream input data using next conversion determining state transition table searched by converted input data

~ 00175