An amorphous carbon coated tool includes a base material of WC base
cemented carbide, and an amorphous carbon film formed on this base
material. The cobalt content in the base material is at least 12% by mass.
The maximum thickness of the amorphous carbon film is at least 0.05 .mu.m
and not more than 0.5 .mu.m at the cutting edge. The amorphous carbon film
is deposited with graphite as the source material by physical vapor
deposition in an atmosphere substantially absent of hydrogen. The
amorphous carbon film coated tool superior in wear resistance and adhesion
resistance is preferably applicable to rotating tools such as drills, end
mills and reamers, indexable inserts used for milling cutters and turning
tools, and cutting-off tools such as cutters, knives, or slitters.
Ein formloser Carbon beschichtetes Werkzeug schließt ein Grundmaterial WC Unterseite des zementierten Karbids und einen formlosen Carbonfilm, der auf diesem Grundmaterial gebildet wird mit ein. Der Kobaltinhalt im Grundmaterial ist 12% mindestens durch Masse. Die maximale Stärke des formlosen Carbonfilmes ist mindestens 0.05 mu.m und nicht mehr als 0.5 mu.m an der Schneide. Der formlose Carbonfilm wird bei Graphit als der Ausgangsstoff durch körperliche Dampfabsetzung in einer Atmosphäre niedergelegt, die vom Wasserstoff im wesentlichen abwesend ist. Der formloser beschichtete Werkzeugvorgesetzte des Carbons Film in der Verschleißfestigkeit und Adhäsion Widerstand ist auf drehende Werkzeuge wie Bohrgeräte, Ende Mühlen und Bohrwerkzeuge, die indexable Einsätze, die für Prägescherblöcke benutzt werden und drehenwerkzeuge und Ausschnitt-weg Werkzeuge wie Scherblöcke, Messer oder Slitter vorzugsweise anwendbar.