A method of manufacturing a light emitting device is provided which
requires low cost, is easy, and has high throughput. The method of
manufacturing a light emitting device is characterized in that: a solution
containing a light emitting material is ejected to an anode or cathode
under reduced pressure; a solvent in the solution is volatilized until the
solution reaches the anode or cathode; and the remaining light emitting
material is deposited on the anode or cathode to form a light emitting
layer. A burning step for reduction in film thickness is not required
after the solution application. Therefore, the manufacturing method, which
requires low cost and is easy but which has high throughput, can be
provided.
Un método de fabricar un dispositivo que emite ligero se proporciona que requiera bajo costo, es fácil, y tiene alto rendimiento de procesamiento. El método de fabricar un dispositivo que emite ligero se caracteriza en ése: una solución que contiene una luz que emite el material se expulsa a un ánodo o a un cátodo bajo presión reducida; un solvente en la solución se volatiliza hasta que la solución alcanza el ánodo o el cátodo; y la luz restante que emite el material se deposita en el ánodo o el cátodo para formar una capa que emite ligera. Un paso ardiente para la reducción en espesor del film no se requiere después del uso de la solución. Por lo tanto, el método de fabricación, que requiere el bajo costo y es fácil solamente que tiene alto rendimiento de procesamiento, puede ser proporcionado.