Method for the production of optical components with increased stability, components obtained thereby and their use

   
   

A method is described for the production of optical components, particularly of crystalline base material, with elevated stability and an optically active three-dimensional shape, which is defined by its surfaces, of high fit accuracy, by shaping the base material into a blank with a desired three-dimensional shape, and applying a covering layer to the surface of the thus-formed three-dimensional shape and the fit accuracy is obtained by abrasion of the covering layer.

Un metodo è descritto per la produzione dei componenti ottici, specialmente di materiale basso cristallino, con stabilità elevata e una figura tridimensionale otticamente attiva, che è definita dalle relative superfici, di esattezza adatta di high, modellando il materiale basso in uno spazio in bianco con una figura tridimensionale voluta ed applicare uno strato del covering alla superficie della figura tridimensionale così-formata e dell'esattezza adatta è ottenuta da abrasione dello strato del covering.

 
Web www.patentalert.com

< Method for producing digitally designed carpet

< Light emitting ceramic device and method for fabricating the same

> Method for optical module packaging of flip chip bonding

> Osteoblast-specific mitogens and drugs containing such compounds

~ 00162