Adaptation performance improvements for active control of sound or vibration

   
   

A noise or vibration control system improves the quality of adaptation estimates by filtering the input signals to the adaptation, selectively implementing a "dead-zone" during which adaptation does not occur and by selectively adding a dither signal to the control commands. The dead-zone is based on the magnitude of the changes in the control commands, which are responding to the changes in the sensor signals. The dead-zone can be applied to all actuators simultaneously, or can be applied to the adaptation of each actuator channel independently. To maintain identifiability, a "dither signal" is added to the control commands to "ping" the system to increase the amount of information available to the adaptive algorithm. The dither signal is preferably implemented on only one actuator channel at a time. Also, the dither amplitude for each channel is preferably set to be proportional to the current control amplitude. The quality of the adaptation estimates is also improved by filtering the input signals to the adaptation circuit, y.sub.k =.DELTA.z.sub.k, and v.sub.k =.DELTA.u.sub.k. Among other things, the filter matches the filtering applied by the harmonic estimator.

Un système de commande de bruit ou de vibration améliore la qualité des évaluations d'adaptation en filtrant les signaux d'entrée à l'adaptation, mettant en application sélectivement une "mort-zone" pendant quelle adaptation ne se produit pas et en ajoutant sélectivement un signal de transe aux commandes de commande. La mort-zone est basée sur l'importance des changements des commandes de commande, qui répondent aux changements des signaux de sonde. La mort-zone peut être appliquée à tous les déclencheurs simultanément, ou peut être appliquée à l'adaptation de chaque canal de déclencheur indépendamment. Pour maintenir l'identifiabilité, un "signal de transe" est ajouté aux commandes de commande "de cingler" le système pour augmenter la quantité de l'information disponible à l'algorithme adaptatif. Le signal de transe est de préférence mis en application sur seulement un canal de déclencheur à la fois. En outre, l'amplitude de transe pour chaque canal est de préférence placée pour être proportionnelle à l'amplitude courante de commande. La qualité des évaluations d'adaptation est également améliorée en filtrant les signaux d'entrée au circuit d'adaptation, au y.sub.k = au DELTA.z.sub.k, et v.sub.k = DELTA.u.sub.k. Entre autres, le filtre assortit le filtrage appliqué par l'estimateur harmonique.

 
Web www.patentalert.com

< Method, apparatus, media and signals for identifying associated cell signaling proteins

< Networking infrastructure for an operating room

> X-ray inspection system

> Method of treating a tumor by pre-irradiation

~ 00161