Method for removing chrome and/or nickel from liquid slags

   
   

In a method for removing chromium oxide and nickel oxide, and combinations thereof, from liquid slags or slag mixtures, in which the liquid slag is A charged onto a metal bath, in particular an iron bath, and reduced by feeding carbon or carbon carriers, the carbon feed into the metal bath is effected until a decrease of the Cr and/or Ni oxide contents of the slag to a value of between 0.8 wt.-% and 0.2 wt.-%. As the pregiven Cr and/or Ni oxide content range of the slag is reached, reductants having higher reduction potentials such as, e.g., Al, Ca, Si, Fe--Si or Ca--Si are added in order to lower the Cr and/or Ni oxide contents to below 0.15 wt.-%, preferably below 0.08 wt.-%.

В методе для извлекать окись хромия и окись никеля, и комбинациях thereof, от жидкостных шлаков или смесей шлака, в которых жидкостный шлак будет а порученным на ванну металла, в частности ванну утюга, и уменьшенным путем подавать углерод или несущие углерода, питание углерода в ванну металла не произвести эффект до уменшения содержание окиси cr and/or ni шлака к значению между 0.8 WT % и 0.2 WT %. По мере того как pregiven cr and/or ряд содержания окиси достигается ni шлака, добавлены, что понижают reductants имея более высокие потенциалы уменьшения such as, например, al, ca, кремний, fe -- кремний или ca -- кремний содержание окись cr and/or ni до под 0.15 WT %, предпочтительн под 0.08 WT %.

 
Web www.patentalert.com

< Ferritic stainless steel sheet for fuel tank and fuel pipe

< Inoculation filter

> Non-ridging ferritic chromium alloyed steel

> Alkoxylated silicone carboxylate-polymeric cationic complexes used in personal care applications

~ 00161