Fastener, hammering jig for installing the fastener, and drill bit for working undercut hole

   
   

In a fastener of a post-installation type which is embedded after a drilled hole is provided at concrete structure, a sleeve (2) and a plug (3) press-fitted to the sleeve are positioned by convexoconcave engagement between a projecting portion at an inner periphery of an expansion portion (6) and a recess groove (11) at a tip end of the plug (3) before installation, and therefore the separation therebetween is prevented. After installation, the projection portion at the inner periphery of the expansion portion (6) expanded is again engaged with the recess groove (12) of the tip end of the plug (3). By this positioning effect, the fastener performs an effect for preventing a loosening between the sleeve and the plug against the vibrations.

In un fermo di un tipo dell'alberino-installazione che è incluso dopo che un foro perforato sia fornito alla struttura in cemento armato, un manicotto (2) e una spina (3) prem-misura al manicotto sono posizionati dall'aggancio del convexoconcave fra una parte proiettantesi ad una periferia interna di una parte di espansione (6) e una scanalatura di incavo (11) ad un'estremità di punta della spina (3) prima di installazione e quindi la separazione therebetween è evitato. Dopo installazione, la parte della proiezione alla periferia interna della parte di espansione (6) espansa è agganciata di nuovo con la scanalatura di incavo (12) dell'estremità di punta della spina (3). Da questo effetto posizionante, il fermo effettua un effetto per impedire un allentamento fra il manicotto e la spina contro le vibrazioni.

 
Web www.patentalert.com

< Methods for conducting metabolic analyses

< Fiber-reinforced recycled thermoplastic composite and method

> Container for coins or tokens

> Projector including a relay optical system

~ 00161