Method of controlling charging potential of conductive roller in printer and apparatus therefor

   
   

A method of controlling a charging potential of an organic photoconductive cell (OPC) includes a first operation of applying two charging voltages Vc1 and Vc2 having respective duties D1 and D2 established in an engine controller unit (ECU) to a conductive roller via a high voltage power supply (HVPS) to charge the OPC, a second operation of measuring sensing voltages Vs1 and Vs2 through a sensing resistor Rs coupled to the conductive roller so that the ECU establishes a target charging current it and calculates a new charging voltage Vc3 and a new duty D3, a third operation of applying the new charging voltage Vc3 and the new duty D3 to the conductive roller via the HVPS to charge the OPC and measuring a charging current Ic3 of the conductive roller, and a fourth operation of comparing a difference between the charging current Ic3 of the conductive roller and the target charging current It with a tolerance value TOL to control the charging potential by using the target charging current when the difference is smaller than the tolerance value TOL. The method maintains the charging potential by compensating for a residual potential of the OPC, thus improving a performance of a printer.

Een methode om een het laden potentieel van een organische fotoconductieve cel (Portlandcement) te controleren omvat een eerste verrichting van het toepassen van twee het laden voltages Vc1 en Vc2 die respectieve plichten D1 en D2 hebben gevestigd in een eenheid van het motorcontrolemechanisme (ECU) op een geleidende rol via een levering van de hoog voltagemacht (HVPS) om Portlandcement, een tweede verrichting te laden van het meten van het ontdekken voltages Vs1 en Vs2 door een ontdekkende weerstand Rs die aan de geleidende rol wordt gekoppeld zodat ECU doel huidig laden het vestigt en een nieuw het laden voltage Vc3 en een nieuwe plicht D3, een derde verrichting van het toepassen van het nieuwe het laden voltage Vc3 en de nieuwe plicht D3 op geleidend berekent irst operation of applying two charging voltages Vc1 and Vc2 having respective duties D1 and D2 established in an engine controller unit (ECU) to a conductive roller via a high voltage power supply (HVPS) to charge the OPC, a second operation of measuring sensing voltages Vs1 and Vs2 through a sensing resistor Rs coupled to the conductive roller so that the ECU establishes a target charging current it and calculates a new charging voltage Vc3 and a new duty D3, a third operation of applying the new charging voltage Vc3 and the new duty D3 to the conductive roller via the HVPS om Portlandcement en het meten van het laden huidige Ic3 van de geleidende rol, en een vierde verrichting te laden van het vergelijken van een verschil tussen het laden huidige Ic3 van de geleidende rol en doel huidig belasten het met een tolerantiewaarde TOL om het het laden potentieel te controleren door de doel het laden stroom te gebruiken wanneer het verschil kleiner is dan de tolerantiewaarde TOL. De methode handhaaft het het laden potentieel door een overblijvend potentieel van Portlandcement te compenseren, waarbij prestaties van een printer worden verbeterd.

 
Web www.patentalert.com

< Management system for automated wire bonding process

< Apparatus and method of transferring transmission stream in digital interface

> Received data processing method in communication device for supporting bluetooth wireless communication

> Method for automatic device monitoring by a central computer

~ 00155