Switching system with a combined switching and blocking device

   
   

A switching system comprises at least one fused switch unit (10) with a fuse link (20) which can be switched on and off, having a make switch and a break switch and a blocking apparatus, for keeping the circuit open. A combined switching and blocking apparatus (30) is provided, with a blocking element (32) having at least one blocking rod (33) for each fused switch unit (10) being mounted on an operating lever (31) of the switch. An interlocking element (35) having an opening (36) is provided for each fused switch unit (10) and can be switched to and fro in the fused switch unit (10) together with the associated fuse link (20). A blocking rod (33) can be inserted into the opening (36) in the interlocking element (35) only when the fuse link (20) is in its switched-on position. The operating lever (31) of the switch can be switched to close the circuit only when each blocking rod (33) can be inserted into the associated opening (36) in the interlocking element (35). A fuse link (20) cannot be moved to its switched-off position when the blocking rod (33) is inserted into the opening (36) in the interlocking element (35).

Un sistema di commutazione contiene almeno un'unità fusa dell'interruttore (10) con un collegamento del fusibile (20) che può essere commutato in funzione e a riposo, avente un interruttore di marca e un interruttore della rottura e un apparecchio ostruente, dato che mantenente il circuito aperto. Un apparecchio di commutazione ed ostruente unito (30) è fornito, di un elemento ostruente (32) che ha almeno un asta ostruente (33) per ogni unità fusa dell'interruttore (10) che è montata su una leva di funzionamento (31) dell'interruttore. Un elemento di collegamento (35) che ha un'apertura (36) è fornito per ogni unità fusa dell'interruttore (10) e può essere commutato avanti e indietro nell'unità fusa dell'interruttore (10) insieme al collegamento collegato del fusibile (20). Un asta ostruente (33) può essere inserito nell'apertura (36) nell'elemento di collegamento (35) soltanto quando il collegamento del fusibile (20) è in relativo commut- sulla posizione. La leva di funzionamento (31) dell'interruttore può essere commutata per chiudere il circuito soltanto quando ogni asta ostruente (33) può essere inserito nell'apertura collegata (36) nell'elemento di collegamento (35). Un collegamento del fusibile (20) non può essere spostato verso la relativa posizione commutata-fuori quando l'asta ostruente (33) è inserito nell'apertura (36) nell'elemento di collegamento (35).

 
Web www.patentalert.com

< Waste glass substrate

< Method and control structure for a sensor heater

> Wind chime apparatus

> Acoustic guitar assembly

~ 00151