An internal impedance of a battery (30) is automatically determined by
operating a processor (13) to analyze current flowing through the battery
to determine if a transient condition due to change of current is
occurring and determining when the transient condition has ended. A
voltage of the battery is measured while a steady current is being
supplied by the battery. The present depth of discharge (DOD) of the
battery is determined and a database is accessed to determine a
corresponding value of open circuit voltage. The internal impedance is
computed by dividing the difference between the measured voltage of the
battery and the open circuit voltage at the present DOD by an average
value of the steady current. A remaining run-time of the battery can be
determined using a total zero-current capacity of the battery, integrating
the current to determine a net transfer of charge from the battery,
determining a value of total run-time that would be required to reduce the
voltage of the battery to a predetermined lower limit, determining the
duration of the integrating, and determining the remaining run-time by
subtracting the duration of the integrating from the total run-time.
Una impedancia interna de una batería (30) es determinada automáticamente funcionando un procesador (13) para analizar la corriente que atraviesa la batería para determinarse si una condición transitoria debido al cambio de la corriente es que ocurre y de determinación de cuando la condición transitoria ha terminado. Un voltaje de la batería se mide mientras que una corriente constante está siendo provista por la batería. La actual profundidad de la descarga (DOD) de la batería se determina y una base de datos está alcanzada para determinar un valor correspondiente del voltaje del circuito abierto. La impedancia interna es computada dividiendo la diferencia entre el voltaje medido de la batería y el voltaje del circuito abierto en el actual DOD por un valor medio de la corriente constante. Un tiempo de pasada restante de la batería se puede determinar usando una capacidad cero-actual total de la batería, integrando la corriente para determinar una transferencia neta de la carga de la batería, determinando un valor del tiempo de pasada total que sería requerido para reducir el voltaje de la batería a un límite más bajo predeterminado, determinando la duración de integrar, y determinando el tiempo de pasada restante restando la duración de integrar a partir del tiempo de pasada total.