Light-emitting device and method for manufacturing the same

   
   

A nanometer size roughened structure is formed on a surface of a light-emitting element, and luminous efficiency is improved. The roughened structure is formed into the following shape to change refractive index smoothly: (1) the mean diameter of projections on the roughened surface is smaller than the light wavelength; (2) a pitch of the roughened surface is irregular; and (3) positions of the top and bottom of the roughened surface are distributed from their mean values within the light wavelength. The surface of such light-emitting element is obtained by forming a thin film on the surface of the light-emitting element using a block or graft copolymer comprising resin composition and forms a self-assembled microphase-separated structure; selectively removing at least one phase of the microphase-separated structure; and etching the surface of the light-emitting element using the remaining phase as an etching mask.

Uma estrutura tornada áspera tamanho do nanômetro é dada forma em uma superfície de um elemento light-emitting, e a eficiência luminous é melhorada. A estrutura tornada áspera é dada forma na seguinte forma para mudar lisamente o índice refractive: (1) o diâmetro médio das projeções na superfície tornada áspera é menor do que o wavelength claro; (2) um passo da superfície tornada áspera é irregular; e (3) as posições do alto e do fundo da superfície tornada áspera são distribuídas de seus valores médios dentro do wavelength claro. A superfície de tal elemento light-emitting é obtida dando forma a uma película fina na superfície do elemento light-emitting usando um copolymer do bloco ou do graft que compreende a composição da resina e dá forma a uma estrutura microphase-separada self-montada; seletivamente removendo ao menos uma fase da estrutura microphase-separada; e gravura a água-forte a superfície do elemento light-emitting usando a fase restante como uma máscara gravura a água-forte.

 
Web www.patentalert.com

< Polyvinylidene fluoride composites and methods for preparing same

< Holder, system, and process for improving overlay in lithography

> IR-MALDI mass spectrometry of nucleic acids using liquid matrices

> Low emissions one part adhesive

~ 00148