Well treating process and system

   
   

A method for the treatment of a subterranean formation penetrated by a well in which, first and second flow paths are established from the wellhead into the vicinity of the formation. A plugging fluid comprising a suspension of a particulate plugging agent in a carrier liquid is circulated into the first flow path and into contact with the wall of the well within the subterranean formation. The carrier liquid is separated from the particulate plugging agent by circulating the carrier liquid through a set of openings leading to the second flow path, which are dimensioned to allow the passage of the carrier liquid while retaining the particulate plugging agent in contact with the set of openings. The circulation of the plugging fluid continues until the particulate plugging agent accumulates to form a bridge packing within the well. Subsequent to establishing the bridge packing, a treating fluid is introduced into the well through the first flow path and in contact with the surface of the formation in the well adjacent to the bridge packing. The treating fluid may be a fracturing fluid under or an acidizing fluid. A clean-up fluid is circulated into the second flow path to remove the bridge packing.

Μια μέθοδος για την επεξεργασία ενός υπόγειου σχηματισμού που διαπερνιέται από ένα φρεάτιο το οποίο, πρώτα και στη δεύτερη ροή οι πορείες καθιερώνονται από την πηγή στην εγγύτητα του σχηματισμού. Ένα συνδέοντας ρευστό που περιλαμβάνει μια αναστολή ενός μοριακού συνδέοντας πράκτορα σε ένα υγρό μεταφορέων κυκλοφορούν στην πρώτη πορεία ροής και στην επαφή με τον τοίχο σύμφωνα με τον υπόγειο σχηματισμό. Το υγρό μεταφορέων χωρίζεται από το μοριακό συνδέοντας πράκτορα με την κυκλοφορία του υγρού μεταφορέων μέσω ενός συνόλου ενάρξεων που οδηγούν στη δεύτερη πορεία ροής, οι οποίες διαστασιολογούνται για να επιτρέψουν τη μετάβαση του υγρού μεταφορέων διατηρώντας το μοριακό συνδέοντας πράκτορα σε επαφή με το σύνολο ενάρξεων. Η κυκλοφορία του συνδέοντας ρευστού συνεχίζεται έως ότου συσσωρεύει ο μοριακός συνδέοντας πράκτορας για να διαμορφώσει μια συσκευασία γεφυρών μέσα στο φρεάτιο. Μετά από στην καθιέρωση της συσκευασίας γεφυρών, ένα ρευστό μεταχείρησης εισάγεται στο φρεάτιο μέσω της πρώτης πορείας ροής και σε επαφή με την επιφάνεια του σχηματισμού στο φρεάτιο δίπλα στη συσκευασία γεφυρών. Το ρευστό μεταχείρησης μπορεί να είναι ένα σπάζοντας ρευστό κάτω ή ένα acidizing ρευστό. Ένα ρευστό καθαρισμού κυκλοφορούν στη δεύτερη πορεία ροής για να αφαιρέσει τη συσκευασία γεφυρών.

 
Web www.patentalert.com

< Catalytic production of light olefins from naphtha feed

< Synthetic hydrocarbon fluid

> Method for automated horizon transfer and alignment through the application of time-shift volumes

> Reactivation of aromatics alkylation catalysts

~ 00142