Data transmitting method in a CDMA system

   
   

There is provided a data transmitting method in a CDMA system. In the CDMA system, a control hold state and an active state are set for data transmission between a mobile station and a base station. The control hold state is entered to transmit a control signal on a dedicated control channel and the active state is divided into a low rate transmission substate for transmitting a small amount of data on the dedicated control channel or/and a fundamental channel and a high rate transmission substate for transmitting a large amount of data on a supplemental channel and on at least one of the dedicated control channel and the fundamental channel. When a large amount of user data is generated in the mobile station, the mobile station generates a supplemental channel request message including supplemental channel request information needed to transit from the control hold state to the high rate transmission substate without interposition of the low rate transmission substate and state transition information needed to transit from the control hold state to the active state, and transmits the supplemental channel request message to the base station.

 
Web www.patentalert.com

< Semiconductor memory device for reducing chip size

< Optical disc drive

> Pilot signals for synchronization and/or channel estimation

> Apparatus and method for increasing definition of digital television

~ 00137