A base station controller includes circuitry for determining whether a
transmitter is transmitting in a DTX mode or operation for a supplemental
channel in a CDMA network. The invention includes the steps of determining
frame quality metrics for data received on a fundamental and a
supplemental channel. If the frame quality metric is good, meaning that
the number of errors is below a defined threshold, on the supplemental
channel, then the mobile station is not, by definition, within a DTX mode
of operation. However, if each of the base stations that are on the active
list of base stations for the mobile station report that the mobile
station frame quality metric is not below or within a specified threshold,
then the base station performs a calculation to determine whether the
mobile station is in a DTX mode of operation or is transmitting a null
set. Specifically, the base station calculates a signal to noise ratio for
the pilot channel as well as for the supplemental channel and compares or
determines a ratio of these two calculations. If the ratio is within or
below a specified threshold, then an erasure has occurred. If not, then
the mobile station did transmit in a DTX mode of operation.
Регулятор базовой станции вклюает сети для обусловливать передает ли передатчик в режим или деятельность DTX для дополнительного канала в сети CDMA. Вымысел вклюает шаги обусловливать metrics качества рамки для данных полученных на принципе и дополнительном канале. Если качество рамки метрическое хорошо, то намереваться что число ошибок под определенным порогом, на дополнительном канале, тогда передвижной станции не, определением, в пределах mode of operation DTX. Однако, если каждый базовых станций которые на активно перечне базовые станции для передвижного отчета о станции что передвижное качество рамки станции метрическое не находится под или внутри определенным порогом, после этого базовая станция выполняет вычисление для того чтобы обусловить, то находится ли передвижная станция в mode of operation DTX или передает нулевой комплект. Специфически, базовая станция высчитывает коэффициент signal to noise для пилотного канала также,как для дополнительный канал и сравнивает или обусловливает коэффициент этих 2 вычислений. Если коэффициент находится в пределах или под определенным порогом, то стирание происходило. If not, после этого передвижная станция передала в mode of operation DTX.