Cordless soldering iron and electrical continuity testing device

   
   

The present invention provides a soldering iron with a graphite tip having two separate halves that are electrically isolated from one another. The tip halves are each electrically connected to the opposite sides of an electrical power source. When both halves of the tip are applied to an electrically conductive material, such as the material to be soldered, an electrical circuit between the tip halves and electrical power source is completed. The halves are of the tip are constructed from material semi-conductive electrically and having high thermal conductivity. Therefore, the tip can reach operating temperatures quickly. When the tip is removed from the joint, the electrical circuit is broken and the tip material may quickly cool to a temperature safe for human contact. Because electricity is only able to flow when the two pieces of the tip are electrically connected, no separate switch is required. The tip material permits higher power outputs than other battery operated portable soldering irons and permits over 300 joints for each full charge. The soldering iron also includes a light disposed on the case to illuminate the tip and joint. However, the light is controlled by a separate switch and permits the tool to be used to illuminate the operator's surroundings without the risk of damage to persons or property from a heated tip. The tool also includes an electrical lead connected in series with the lamp, the power source, and a continuity testing probe. This aspect of the invention permits the tool to function as a continuity tester.

Присытствыющий вымысел обеспечивает паяя утюг при конец графита имея 2 отдельно половины электрически изолированы от одной другое. Половины конца каждое электрически соединенное к противоположным сторонам источника электропитания. Когда обе половины конца приложены к электрически проводному материалу, such as материал, котор нужно припаять, завершиты электрическая цепь между половинами конца и источник электропитанием. Половины конца построены от материальное семи-provodnogo электрически и имеющ высокую термально проводимость. Поэтому, конец может достигнуть рабочие температуры быстро. Когда конец извлекается от соединения, электрическая цепь сломленна и материал конца может быстро охладить к сейфу температуры для контактыа между людьми. Потому что электричество может только пропустить когда 2 части конца электрически соединены, никакой отдельно переключатель необходим. Материал конца позволяет более высокие выходные мощности чем другие утюги эксплуатируемые батареей портативные паяя и позволяет над 300 соединениями для каждой полной обязанности. Паяя утюг также вклюает свет размещанный на случае для того чтобы осветить конец и соединение. Однако, свет проконтролирован отдельно переключателем и позволяет инструмент быть использованным для того чтобы осветить surroundings оператора без риска повреждения к людям или свойства от нагретого конца. Инструмент также вклюает электрическое руководство соединенное в серию с светильником, источником питания, и зондом проверки непрерывности цепи. Этот аспект вымысла позволяет инструмент действовать как тестер непрерывности.

 
Web www.patentalert.com

< Method and apparatus for high denier hollow spiral fiber

< Nonwoven composite with high pre-and post-wetting permeability

> Hems, edges, patches and seams for durable, water repellant woven fabric, and methods for making the same

> Fexible electronic device

~ 00135