Prevention of power state change in response to chassis intrusion when computer system is not in powered up power state

   
   

A gating circuit for a computer system to prevent a power management signal provided by a computer card slot connector or a system board mounted device to change the power state of the computer system from a lower power state to a higher power state when the chassis of the computer system is open. The computer system includes a chassis intrusion detection switch to provide an indication of whether the chassis is open. In one example, the computer card connector is a card slot connector that conforms to the PCI or AGP computer bus standards, and the power management signal is a PME# signal. The gating circuit also prevents a wake on LAN (WOL) signal received via a jumper from a WOL circuit from changing the power state of the computer system from a lower power state to a higher power state. When the gating circuit receives an indication that the computer system is in a powered up power state, the gating circuit provides a gated power signal to change the power state of the computer system in response to receiving a PME# or WOL signal regardless of whether the chassis is open or closed. The computer system implements a power management strategy such as the Advanced Configuration and Power Interface power strategy. The gating circuit prevents a PME# signal or WOL signal from placing a computer circuit in a higher power state from a non powered up power state during the installation of a computer card in the computer system.

Стробируя цепь для системы компьютера для того чтобы предотвратить сигнал управления силы обеспечила разъемом гнезда для платы компьютера или доска системы установила приспособление для того чтобы изменить положение силы системы компьютера от более низкого положения силы к положению более высокой силы когда шассиий системы компьютера открыто. Система компьютера вклюает переключатель обнаружения вторжения шассиего для того чтобы указать ли шассиий открыто. В одном примере, разъем карточки компьютера будет разъемом гнезда для платы который соответствует к стандарты шины компьютеру pci или AGP, и сигнал управления силы PME # сигнал. Стробируя цепь также предотвращает бодрствование на сигнале lan (WOL) полученном через шлямбур от цепи WOL от изменять положение силы системы компьютера от более низкого положения силы к положению более высокой силы. Когда стробируя цепь получает индикацию что система компьютера находится в приведенное в действие вверх приводит положение в действие, стробируя цепь подает отстробированный сигнал силы изменить положение силы системы компьютера in response to получать PME # или сигнал WOL regardless of ли шассиий открыто или закрыто. Система компьютера снабжает стратегию управления силы such as предварительная стратегия силы поверхности стыка конфигурации и силы. Стробируя цепь предотвращает PME # сигнал или сигнал WOL от устанавливать цепь компьютера в положении более высокой силы от non приведенное в действие вверх приводит положение в действие во время установки карточки компьютера в системе компьютера.

 
Web www.patentalert.com

< Intrusion detection system and method having dynamically loaded signatures

< Vehicle image capture system

> System and method for intrusion detection data collection using a network protocol stack multiplexor

> Method and apparatus for improving the sensitivity of a taut wire intrusion detection system

~ 00134