A fastening device for connecting an attached component to a printed
circuit board (PCB) has an elongated body, an operating member and a
resilient member. The elongated body penetrates through the attached
component and the PCB, and has a reducing section disposed at a lower half
thereof and a protruding portion positioned on a free end thereof. The
operating member eccentrically pivots to the elongated body, and has an
eccentric body and a pressing arm outwardly extending from the eccentric
body. The resilient member sleeves on an upper half of the elongated body.
The resilient member has a clipping portion disposed at an end thereof and
tightly contacting the reducing section. The protruding portion is
consequently uplifted to force the clipping portion horizontally
supporting a bottom of the PCB while the pressing arm is pushed
downwardly, such that the attached component is connected to the PCB.
Приспособление крепления для соединять прикрепленный компонент к доске печатной схеми (pcb) имеет elongated тело, работая член и resilient член. Elongated тело прорезывает через прикрепленный компонент и pcb, и имеет уменьшая раздел размещанный на более низкой половине thereof и выступая части расположенной на свободно конец thereof. Работая член ексцентрическо делает поворот к elongated телу, и имеет ексцентрическое тело и отжимая рукоятку наружно удлиняя от ексцентрического тела. Resilient втулки члена на верхней половине elongated тела. Resilient член имеет часть клиппирования размещанную на конце thereof и плотно контактирующ уменьшая раздел. Выступая часть последовательн uplifted для того чтобы принудить часть клиппирования горизонтально поддерживая дно pcb пока отжимая рукоятка нажата ухудшающе, такого что прикрепленный компонент соединен к pcb.