Vacuum generating device

   
   

A vacuum generating device designed to generate negative pressure in an absorption means, such as an absorption pad, of a vacuum system, is disclosed. The vacuum generating device accomplishes the recent trend of compactness and smallness of such devices, effectively protects its ejector unit from damage, and does not have an increased production cost in comparison with conventional vacuum generating devices. The vacuum generating device includes a block body having an air inlet port, a vacuum port, and an air outlet port, an ejector unit functioning to generate negative pressure in response to an action of compressed air flowing thereto via the air inlet port, and a control valve mechanism functioning to open or close air supply paths branching from a main flow path to an air inlet chamber of the ejector unit and the vacuum port. The block body has a recess, formed by depressing a surface of the block body to a predetermined depth. The ejector unit is formed in the recess by depressing predetermined portions of the recess. A cover is set in the recess of the block body to seal the ejector unit from the outside.

Ein Vakuum, das Vorrichtung erzeugt, entwarf, negativen Druck in eine Absorption den Mitteln, wie einer Absorption Auflage, eines Vakuumsystems zu erzeugen, wird freigegeben. Das Vakuum, das Vorrichtung erzeugt, vollendet die neue Tendenz von Kompaktheit und von Smallness solcher Vorrichtungen, schützt effektiv seine Ejektormaßeinheit vor Beschädigung und hat erhöhten Produktion Kosten nicht im Vergleich mit dem herkömmlichen Vakuum, das Vorrichtungen erzeugt. Das Vakuum, das Vorrichtung erzeugt, schließt einen Blockkörper ein, der ein Lufteinlauftor, ein Vakuumtor und eine Luftabflußöffnung, eine Ejektormaßeinheit arbeiten, um negativen Druck in Erwiderung auf eine Tätigkeit der komprimierten Luft zu erzeugen dazu fließend über das Lufteinlauftor und eine Steuerventileinheit arbeiten, um sich zu öffnen oder die nahen Luftzufuhrwege sich ausbreiten von einem Hauptflußweg zu einem Lufteinlaufraum der Ejektormaßeinheit und des Vakuumtores hat. Der Blockkörper hat eine Aussparung, gebildet, indem er eine Oberfläche des Blockkörpers zu einer vorbestimmten Tiefe niederdrückt. Die Ejektormaßeinheit wird in der Aussparung gebildet, indem man vorbestimmte Teile der Aussparung niederdrückt. Eine Abdeckung wird in die Aussparung des Blockkörpers eingestellt, um die Ejektormaßeinheit von der Außenseite zu versiegeln.

 
Web www.patentalert.com

< Cylinder head for reciprocating compressor

< Identification system for a surgical cassette

> Micropump

> Fluid system

~ 00127