Vaporizer temperature control in fuel cell power plant

   
   

A fuel cell stack (8) generates power using hydrogen-rich gas obtained by reforming vaporized methanol in a reformer (6). The vaporized methanol is generated by vaporizing liquid methanol in a vaporizer (5). The vaporizer (5) is heated by combustion gas from a combustor (10). A sensor (31) detects a liquid methanol amount supplied to the vaporizer (5) by a methanol pump (4). A controller (100) calculates a prediction temperature of the vaporizer (5) based on the liquid methanol supply amount, and limits an increase of the liquid methanol supply amount from the methanol pump (4) so that the prediction temperature does not fall below a predetermined temperature (S7A, S7B). In this way, temperature drop of the vaporizer (5) from the predetermined temperature is prevented.

Uma pilha da célula combustível (8) gera o poder usando o gás hidrogênio-rico obtido pelo metanol vaporizado reformando em um reformer (6). O metanol vaporizado é gerado vaporizando o metanol líquido em um vaporizer (5). O vaporizer (5) é aquecido pelo gás de combustão de um combustor (10). Um sensor (31) detecta uma quantidade líquida do metanol fornecida ao vaporizer (5) por uma bomba do metanol (4). Um controlador (100) calcula uma temperatura da predição do vaporizer (5) baseado na quantidade líquida da fonte do metanol, e limita um aumento da quantidade líquida da fonte do metanol da bomba do metanol (4) de modo que a temperatura da predição não caia abaixo de uma temperatura predeterminada (S7A, S7B). Nesta maneira, a gota da temperatura do vaporizer (5) da temperatura predeterminada é impedida.

 
Web www.patentalert.com

< Process for conversion of LPG and CH4 to syngas and higher valued products

< Direct dimethyl ether fuel cells

> Combustor temperature control of fuel cell power plant

> Ignition system for a fuel cell hydrogen generator

~ 00126